User's Manual

19-19
Abridged English Manual
19
Charging takes approximately 160 minutes.
1
Connect AC Charger to handset
Insert Charger Connector (printed side up) into External
Port.
2
Plug AC Charger into AC outlet
Extend Charger blades. (Fold back when not in use.)
Charging Indicator illuminates and charging starts.
When Charging is complete, Charging Indicator goes out.
3
When charging is complete, unplug AC
Charger, then disconnect handset
Squeeze Release Tabs to remove Charger Connector, and
replace Port Cover.
Charging Battery
AC Charger
AC100V outlet
Release Tabs
Charging Indicator
Port Cover
External
Port
Charger Connector
! Use only the specified charger.
! Do not pull, bend or twist AC Charger cord.
! AC Charger is compatible with household currents
between AC 100V and 240V.
! SoftBank is not liable for problems resulting from
charging 810P abroad.
Desktop Holder and In-Car Charger are available for
separate purchase.
810P.book Page 19 Tuesday, April 3, 2007 7:40 PM