User's Manual

12
Introduction
List of materials used
■P-01F Handset/Back Cover P61/Battery
Pack P23
Where it is used Material/Finishing
Outer
casing
Display
surface,
Battery
surface,
Battery
surface
(Hinge
side)
PC/UV coating
Connector terminal Stainless steel/
nickel plating, tin
plating
Connector
terminal
cover
Body PC/UV coating
Fitting pin
area
Polyester series
elastomer
Packing Silicon rubber
Panel of camera lens
area, Display panel,
Sub
-
display panel
PMMA/hard coating
Side key ABS
Around the side key ABS/UV coating
Charging terminal Brass/nickel plating,
nickel palladium
plating, gold plating
Key area, Sheet area of
numeric key surface
Acrylic urethane
Battery compartment
surface
Stainless steel/
nickel plating
Where it is used Material/Finishing
Battery
terminal
Resin part PA
Terminal
area
Titanium copper
alloy/nickel plating,
gold plating
Battery
pack
Resin part PC
Terminal
area
Glass epoxy/nickel
plating, gold plating
Label PET/Silicon varnish
docomo
mini UIM
card tray
Substrate
part
Glass epoxy/
gold plating, resist
printing
Resin part
of tray
LCP
Metal part
of tray
Stainless steel
Hinge area Center
area of
display
surface,
Hinge
support
area, Both
ends area
PC/UV coating
Center
area of
sub
-
display
surface
ABS/UV coating
Label (Battery
compartment surface)
PET
Back cover Body PC/UV coating
Packing Silicon rubber
One
-
push open button PC
■Desktop Holder P54
Where it is used Material/Finishing
Outer casing ABS
Connector terminal PPS
Cushion Urethane
Charging terminal Phosphor bronze/
nickel plating, gold
plating
Label PS
Lever POM
Handling Precautions
General notes
■The P-01F is provided with the
waterproof/dust
-
proof performance,
however, do not allow water to seep or
dust to get in the inside of the FOMA
terminal, or do not allow accessories and
optional items to get wet or adhere dust.
The battery, adapter, desktop holder,
and docomo mini UIM card are not
waterproofed/dust
-
proofed. Do not use
them in environments, which are high
in humidity such as in bathrooms, and
do not allow them to get wet from rain.
Furthermore, if carrying them against
your body, they become moist due to
perspiration and the internal parts may
become corroded, causing malfunction.
If the parts are found to have been
damaged due to exposure to the liquids,
any repairs will not be covered by
warranty, or repairs may not be possible.
This may be repaired at a cost if repairs
are possible.