User's Manual

13
Introduction
■Use a dry soft cloth such as the one
for
cleaning glasses to clean the
equipment.
⿠
The display may be scratched if it is
rubbed hard with a dr
y cloth.
⿠ Stains may result from droplets of water
or
dirt if they are left on the display.
⿠Do not use alcohol, thinner, benzene,
detergent or other solvents for cleaning,
otherwise
the printing may be removed
or
discoloration may result.
■Occasionally
clean the terminals of the
equipment using a
dry cotton swab, etc.
The soiled terminals deteriorate the
connection and might cause power
discontinuity
or incomplete charging. Wipe
the
terminals with a cotton swab, etc.
Take care not
to damage the terminals
when cleaning
them.
■Do not place the FOMA terminal near an
air
conditioner outlets.
Condensation may form due to rapid changes
in
temperature, and this may corrode internal
parts and cause malfunction.
■Do not apply excessive force onto the
FOMA
terminal and battery pack.
If you put the FOMA terminal in a bag
along with many
other articles or sit with
the FOMA terminal in a clothes pocket, the
display, internal circuitr
y and the battery
pack
could be damaged or malfunction.
Also, if an external device is left connected
to
the connector terminal (earphone/
microphone
terminal), the connector could
be damaged, or
malfunction.
■Do not rub or scratch the display part
with metals.
Doing so might cause damage
to the
part, resulting in
trouble or malfunction.
■Carefully read each instruction manual
attached
to optional items.
Notes on handling the FOMA terminal
■Avoid using in extremely high or low
temperatures.
The FOMA terminal should be used within
a
temperature range of 5°C to 40°C and a
humidity
range of 45% to 85%.
■If the FOMA terminal is operated near a
land
-
line phone,
television set, radio or
other
devices in use, it may adversely
affect
the devices. Operate the FOMA
terminal as
far away from these devices
as possible.
■It is recommended
that you make
separate notes of
the information stored
in
the FOMA terminal and keep such
notes in a
safe place.
We
take no responsibility for any loss of
the stored data items.
■Do not drop
the FOMA terminal or
subject it
to strong impacts.
Malfunction or
damage may result.
■Do not inser
t an external device to
the connector
terminal (earphone/
microphone
terminal) at a slant when
connecting, and do not pull it out when
it is inser
ted.
Malfunction or
damage may result.
■Make sure that nothing, such as a strap,
gets caught between
the parts of the
FOMA
terminal when you close it.
Otherwise, malfunction or damage may
result.
■The FOMA
terminal becomes warm
during use or
charging but this is not an
abnormality. Use
the FOMA terminal as
it is.
■Do not leave the camera in places
exposed
to direct sunlight.
Pixels may
be discolored or burns may
result.
■When using
the FOMA terminal,
ensure
that you shut the cover for the
connector
terminal.
Dust or water might enter into the FOMA
terminal, causing malfunction.
■Do not use the FOMA terminal with the
back
cover left removed.
The battery pack might come out, or
malfunction or
damage may result.
■Do not apply an excessively thick sticker
onto
the surfaces of the display or keys.
Otherwise, malfunctioning, damage or
problems with operation may
result.
■While
you are using the microSD card,
never
take it off or turn off the power of
the FOMA
terminal.
Data may be erased or malfunction may result.
■Do not place magnetic cards or similar
objects near
the FOMA terminal or
between phone par
ts.
Magnetic data on cash cards, credit
cards,
telephone cards and floppy disks,
etc. may
be deleted.
■Do not bring magnetic substances close
to
your FOMA terminal.
Problems with operation may result if
items with strong magnetic fields are
brought close
to the FOMA terminal.
Notes on handling batteries
■Batteries have a limited life.
Though it varies depending on the usage
state,
you are advised to replace the
battery if its usable time is extremely short
even when
you fully charge it. Make sure
that
you buy the specified battery.