User's Manual

Basic Operation
18
Press and hold
-h
for at
least one second.
After the Wake-up display is
displayed, the Stand-by display
appears.
To turn power off
Press and hold
-h
for at least
two seconds.
1
Turning Power ON
The Initial Setting display appears when
any of Initial Setting items have not
been set.
In that case, follow onscreen instructions.
⿠
For detaching, pull out the connector horizontally
while pressing the release buttons. Malfunction could
result if you try to pull it forcibly.
⿠
When charging starts, the Call/Charging indicator
lights in red. When charging is completed, it turns off.
■
Charging Only with the AC Adapter
Cover
Release
buttons
Connector
terminal
Engraved
surface
Pull out the cover
of the connector
terminal in
direction A,
and turn it in
direction B.
Pull out the cover
of the connector
1
Insert the
connector with
the engraved
surface facing up
until it clicks.
Insert the
connector with
2