User's Manual

Basic Operation
17
About UIM
The UIM is an IC card that holds your
information such as phone numbers.
You cannot use the FOMA terminal for
communications such as voice/videophone
calls, i-mode, or sending/receiving mail,
unless the UIM is inserted.
⿠
Ensure that you turn off, close, and take hold of the
FOMA terminal when you install or remove the UIM
or battery pack.
⿠
You cannot use the UIM (blue) on your FOMA
terminal. If you have that blue one, have it replaced at
a docomo Shop.
Plug the connector
of the AC Adapter
(option) horizontally
with its engraved side
facing down into the
connector terminal of
the Desktop Holder
(option).
Plug the connector
of the AC Adapter
1
Pull out the AC
Adapter’s plug,
and plug it into a
household power
socket of 100 V AC.
Pull out the AC
Adapter’s plug,
2
Put the bottom of the FOMA terminal
into the stopper of the desktop holder
(A) to fi t the head to the lock claw, and
then depress the FOMA terminal until it
clicks (B).
⿠
Be careful that a commercial strap is not caught
between the FOMA terminal and desktop holder.
Put the bottom of the FOMA terminal
into the stopper of the desktop holder
3
When charging is completed, hold the
desktop holder with fi ngers and lift up
the head of FOMA terminal to remove.
When charging is completed, hold the
desktop holder with fi ngers and lift up
4
Charging
Call/Charging
indicator
Connector
Power socket
Engraved
surface
(down side)
AC Adapter
AC
Adapter’s
plug
Lock claw
Stopper
Desktop
Holder
■
Charging Using the Desktop Holder