User's Manual

Basic Operation
16
Remove the back cover.
While pressing the “ ”
part of the back cover in
direction A, slide the back
cover (2 mm or more) in
direction B to unlock and
remove it.
Remove the back cover.
While pressing the “
1
Attach the battery pack.
With the arrow mark facing up,
fi t the tab side of the battery
pack to the FOMA terminal
securely, and then push the
battery pack in direction B
while pressing it against
direction A.
When you remove the battery pack
Engage your nail on the projection of the battery
pack, and lift it up.
Attach the battery pack.
With the arrow mark facing up,
3
Attach the back cover.
With the back cover stayed
open about 2 mm, match it
to the groove on the FOMA
terminal. Then while pushing
the back cover as a whole
downward, slide it in the direction of the arrow, and
then install.
⿠
Confi rm there is no gap between the back cover
and the FOMA terminal.
Attach the back cover.
With the back cover stayed
4
Attaching UIM (FOMA Card)/ Battery Pack
Before Using
Insert the UIM.
⿠
With the golden IC surface
downward, push the UIM
slowly to the end while
pressing the surface of it.
When you remove the UIM
While sliding the UIM, pull it out slowly.
Insert the UIM.
2
Projection
Approx. 2 mm
Arrow mark