User's Manual

4. Mount the camera.
The camera can be mounted in the following ways.
• Do not mount the camera where the sun light directly hits the camera or in outdoor-type housing without a temperature control system. The camera may
malfunction due to high temperature.
• When you mount the camera, always hook the AC adaptor cord to the hook.
Notes
Hook for
AC adaptor cord
• This product is for indoor use only. Do not use it outdoors.
• The camera may become warm. This is not a malfunction.
• Do not mount the camera upside down, as the image will be displayed upside down.
Make sure the indicator is
always in the upper right
corner.
To p
Bottom
Stand Mount
Stand/Tripod
Mounting Hole
Flexible
Stand
Turn the camera to attach it
to the mounting screw on the
flexible stand.
Loosen the mounting screw
to adjust the angle, then
refasten it again.
• The mounting screw can
be manually adjusted.
Tripod Mount
Stand/Tripod
Mounting Hole
Tripod
Ceiling Mount
• Do not mount the camera upside down, as the image will be displayed upside
down.
• We recommend only mounting the camera using the provided hardware.
Mounting in any other manner may cause the camera to fall, resulting in
personal injury or damage to the camera.
• To reduce the load on the mounting hardware, dress the cables neatly and
secure with tape.
• Disconnect all cables from the camera. Reconnect the cables after mounting
the camera.
• Do not mount the camera on a soft
material. The camera may fall and
be damaged.
• Use appropriate screws for the
material of the ceiling.
• The mounting screw can be
manually adjusted.
Notes
Mount the flexible stand firmly to the
ceiling with the two screws (included).
Turn the camera to firmly attach it
to the flexible stand.
Loosen the mounting screw to adjust
the angle, then refasten it again.
Screw
Allow sufficient space between
the wall and the flexible stand
to turn the mounting screw.
Stand/Tripod
Mounting Hole
Mounting Screw
Tape
(customer-provided)
Wall Mount
• Do not mount the camera upside down, as the image will be displayed upside
down.
• We recommend only mounting the camera using the provided hardware.
Mounting in any other manner may cause the camera to fall, resulting in
personal injury or damage to the camera.
• To reduce the load on the mounting hardware, dress the cables neatly and
secure with tape.
• Disconnect all cables from the camera. Reconnect the cables after mounting
the camera.
Notes
Mount the flexible stand firmly to the
wall with the two screws (included).
Turn the camera to firmly attach it
to the flexible stand.
Screw
Allow sufficient space between the
ceiling and the flexible stand to turn
the mounting screw.
Stand/Tripod
Mounting
Hole
Indicator
• Do not mount the camera on a soft
material. The camera may fall and
be damaged.
• Use appropriate screws for the
material of the wall.
Mounting Screw
Tape
(customer-provided)
Disconnect all cables from the
camera. Reconnect the cables
after mounting the camera.
Note
Do not use a tripod screw with a
thread of 6 mm or more. (This
may damage the Stand/Tripod
mounting hole.)
Note
Connect the AC adaptor cord and
Ethernet cable to the camera and
dress the cables neatly and secure
with tape (customer-provided).
Loosen the mounting screw to adjust
the angle, then refasten it again.
• The mounting screw can be
manually adjusted.
Connect the AC adaptor cord and
Ethernet cable to the camera and
dress the cables neatly and secure
with tape (customer-provided).