Operator's Manual

ManualsBrandsPAN9026 ManualsHealth MonitorsBlood Glucose Meter

Table Of Contents

What is new in publication version 7.2?
1 Introduction
- 1.1 Before you start
- 1.2 Important safety instructions and additional information
- 1.3 System components
- 1.4 Overview of the meter
- 1.5 Overview of the code key reader
- 1.6 Overview of the Accu-Chek Inform II Base Unit
- 1.7 Overview of the Accu-Chek Inform II Base Unit Hub
- 1.8 Overview of the accessory box
- 1.9 Reagents and consumables
- 1.10 Instructions for initial setup
2 Powering Up and Entering an Operator ID
- 2.1 Powering up the meter
- 2.2 Entering the operator ID
3 Patient Glucose Testing
- 3.1 Information regarding blood glucose testing
  - Preparing to test
- 3.2 Performing a patient glucose test
4 Glucose Control Testing
- 4.1 Information regarding glucose control tests
- 4.2 Performing glucose control tests
5 Review Results
- 5.1 Displaying test results from the memory
  - Information stored in data records for test results
  - List of results stored in the memory
6 Storing Test Strip, Control Solution, and Linearity Solution Information in the Meter
- 6.1 Storing information about test strips
- 6.2 Storing control solution information
  - Entering the lot number of the control solution
  - Selecting a stored lot number as the current lot number
- 6.3 Storing linearity test information
  - Entering the lot number of the linearity test
  - Selecting a stored lot number as the current lot number
7 Linearity Testing
- 7.1 Information regarding linearity tests
- 7.2 Performing a linearity test
8 Proficiency Testing
- 8.1 Information regarding proficiency tests
  - Information stored during proficiency testing
  - Preparing a proficiency test
- 8.2 Performing a proficiency test
9 Initial Startup
- 9.1 Connecting the base unit
- 9.2 Installing or replacing the battery pack
  - Removing the battery pack
  - Installing the battery pack
- 9.3 Docking the meter
- 9.4 Initial setup on the meter
  - Menu overview
- 9.5 Opening the Setup Menu
- 9.6 Date and time format
- 9.7 Display options and optional tests
- 9.8 Options for test strips
- 9.9 Options for glucose control tests
- 9.10 Value ranges (normal, critical, reportable)
- 9.11 Options for Operator ID Entry
- 9.12 Patient ID options
- 9.13 Creating a setup password
- 9.14 Setting the date and time
- 9.15 Beeper options
10 Maintenance and Care
- 10.1 Conditions for storage and shipping
- 10.2 Cleaning/disinfecting the Accu-Chek Inform II system
- 10.3 How to clean and disinfect the Accu-Chek Inform II system
  - Cleaning the meter
  - Disinfecting the meter
- 10.4 Logging maintenance activities
- 10.5 Diagnostics view
- 10.6 Unlocking a Download Lockout
- 10.7 Service menu
11 Troubleshooting
- Errors and unusual behavior without error messages
- Low power icons
- Pop-up messages
- Table of Information, Warning, and Error messages
- Meter reset
12 General Product Information
- 12.1 Technical data
- 12.2 Further Information
A Appendix
- A.1 Table of configuration options
- A.2 Example of barcode symbologies
B Appendix
- B.1 Option: Wireless network (WLAN)
C Supplement for Other Test Entry
- C.1 Before you start
  - Description
- C.2 Overview of Other Test Entry (OTE)
  - Introduction
- C.3 Recording Other Patient Tests
- C.4 Recording Other Control Tests
- C.5 Reviewing Other Test Results
- C.6 Other Test Entry Configuration Options
D Supplement for Observed Test Sequence
- Observed Test Sequence (OTS)
- Using the OTS function
E Supplement for Enhanced Workflows
- E.1 Configurable workflows
F Appendix for Accu-Chek Inform II Base Unit (legacy version)
- F.1 Overview of the base unit with older hardware
- F.2 Connecting the base unit (legacy version)
- F.3 Technical data
G Limited Warranty
- Accu-Chek® Inform II meter LIMITED WARRANTY
Index

261

Notes