Operator's Manual
Table Of Contents
- What is new in publication version 7.2?
- 1 Introduction
- 1.1 Before you start
- 1.2 Important safety instructions and additional information
- Important information regarding safety
- Disposal of the system
- Product safety
- General care
- Accessory box
- Meter
- Power off meter
- Automatic power-off
- Shut down meter
- Automatic shutdown
- Battery Pack
- Touchscreen
- Electromagnetic compatibility (EMC)
- Electrostatic discharge (ESD)
- Wireless connectivity
- Radiofrequency radiation exposure information
- Local Area Network: protection from unauthorized access
- Wired network connection
- 1.3 System components
- 1.4 Overview of the meter
- 1.5 Overview of the code key reader
- 1.6 Overview of the Accu-Chek Inform II Base Unit
- 1.7 Overview of the Accu-Chek Inform II Base Unit Hub
- 1.8 Overview of the accessory box
- 1.9 Reagents and consumables
- 1.10 Instructions for initial setup
- 2 Powering Up and Entering an Operator ID
- 3 Patient Glucose Testing
- 3.1 Information regarding blood glucose testing
- 3.2 Performing a patient glucose test
- Overview of test procedure
- Entering or selecting the patient ID
- Entering the patient ID manually
- Selecting the patient ID from a list
- Entering a patient ID with barcode scanner
- Confirming or selecting the test strip lot
- Patient identification information
- Inserting test strips
- Obtaining a blood sample
- Applying a blood sample
- Results screen
- Adding comments
- Add barcode content to a result
- Additional Patient Test
- 4 Glucose Control Testing
- 5 Review Results
- 6 Storing Test Strip, Control Solution, and Linearity Solution Information in the Meter
- 7 Linearity Testing
- 8 Proficiency Testing
- 9 Initial Startup
- 9.1 Connecting the base unit
- 9.2 Installing or replacing the battery pack
- 9.3 Docking the meter
- 9.4 Initial setup on the meter
- 9.5 Opening the Setup Menu
- 9.6 Date and time format
- 9.7 Display options and optional tests
- 9.8 Options for test strips
- 9.9 Options for glucose control tests
- 9.10 Value ranges (normal, critical, reportable)
- 9.11 Options for Operator ID Entry
- 9.12 Patient ID options
- 9.13 Creating a setup password
- 9.14 Setting the date and time
- 9.15 Beeper options
- 10 Maintenance and Care
- 11 Troubleshooting
- 12 General Product Information
- A Appendix
- B Appendix
- C Supplement for Other Test Entry
- D Supplement for Observed Test Sequence
- E Supplement for Enhanced Workflows
- F Appendix for Accu-Chek Inform II Base Unit (legacy version)
- G Limited Warranty
- Index
Maintenance and Care • 10
159
08424705001 (04) 2021-06 USA • Accu-Chek Inform II Operator’s Manual Version 7.2
10.5 Diagnostics view
Under Diagnostics you can find information about the
system, such as software version, number of data records
stored, and configuration details. Use this menu to dis-
play stored error messages and test the barcode scanner
and the wireless status (if your meter is equipped with the
WLAN option). The Diagnostics screens shown here are
for illustration purposes only. Information shown on your
meter may differ.
1 Touch in the Main Menu to open the Main
Menu 2 screen.
2 Touch Diagnostics to call up the main screen for
this menu.
3 Touch or to scroll between screens.
Main Menu
Review Results
Control Test
Patient Test
12:48 pm
03/17/20
Main Menu 2
Maintenance
Strip Lots
Proficiency
Control Lots
Beeper
Linearity
Diagnostics
Linearity Lots
Admin.
12:48 pm
03/17/20
Order Strips
Diagnostics
S/W Version: 04.03.02
BSP Version: 07.01.00
Last Download: 03/15/20
Battery Voltage: 3.976 V
Battery Percent: 83
Battery Condition: Good
Log
Serial No: 14300740
12:48 pm
03/17/20
Scan:
Diagnostics
Test
Authenticated:
RF activated:
Associated:
Received IP:
IP:
Subnet:
Gateway:
DNS:
Contacted DMS:
Connected to DMS:
Completed:
192.168.4.117
Wireless Status:
12:48 pm
03/17/20
Diagnostics
SSID:
cobasserver
WLAN:
MAC: b8:78:79:11:74:e4
Use DNS: Disabled
Use DHCP:
Wireless Setup: Page 5
Enabled
12:48 pm
03/17/20
Diagnostics
List - allowed to add new
Reagent Editing:
Date/Time Editing:
STATs:
Patient Validation:
9
None
Operator Validation:
0
Configuration: Page 3
HoursQC Freq:
Strip Limitations Warning:
Used:
Disabled
Enabled
Allowed:
Allowed
12:48 pm
03/17/20