Operator's Manual

ManualsBrandsPAN9026 ManualsHealth MonitorsBlood Glucose Meter

151

152

153

154

155

156

157

158

159

160

Table Of Contents

What is new in publication version 7.2?
1 Introduction
- 1.1 Before you start
- 1.2 Important safety instructions and additional information
- 1.3 System components
- 1.4 Overview of the meter
- 1.5 Overview of the code key reader
- 1.6 Overview of the Accu-Chek Inform II Base Unit
- 1.7 Overview of the Accu-Chek Inform II Base Unit Hub
- 1.8 Overview of the accessory box
- 1.9 Reagents and consumables
- 1.10 Instructions for initial setup
2 Powering Up and Entering an Operator ID
- 2.1 Powering up the meter
- 2.2 Entering the operator ID
3 Patient Glucose Testing
- 3.1 Information regarding blood glucose testing
  - Preparing to test
- 3.2 Performing a patient glucose test
4 Glucose Control Testing
- 4.1 Information regarding glucose control tests
- 4.2 Performing glucose control tests
5 Review Results
- 5.1 Displaying test results from the memory
  - Information stored in data records for test results
  - List of results stored in the memory
6 Storing Test Strip, Control Solution, and Linearity Solution Information in the Meter
- 6.1 Storing information about test strips
- 6.2 Storing control solution information
  - Entering the lot number of the control solution
  - Selecting a stored lot number as the current lot number
- 6.3 Storing linearity test information
  - Entering the lot number of the linearity test
  - Selecting a stored lot number as the current lot number
7 Linearity Testing
- 7.1 Information regarding linearity tests
- 7.2 Performing a linearity test
8 Proficiency Testing
- 8.1 Information regarding proficiency tests
  - Information stored during proficiency testing
  - Preparing a proficiency test
- 8.2 Performing a proficiency test
9 Initial Startup
- 9.1 Connecting the base unit
- 9.2 Installing or replacing the battery pack
  - Removing the battery pack
  - Installing the battery pack
- 9.3 Docking the meter
- 9.4 Initial setup on the meter
  - Menu overview
- 9.5 Opening the Setup Menu
- 9.6 Date and time format
- 9.7 Display options and optional tests
- 9.8 Options for test strips
- 9.9 Options for glucose control tests
- 9.10 Value ranges (normal, critical, reportable)
- 9.11 Options for Operator ID Entry
- 9.12 Patient ID options
- 9.13 Creating a setup password
- 9.14 Setting the date and time
- 9.15 Beeper options
10 Maintenance and Care
- 10.1 Conditions for storage and shipping
- 10.2 Cleaning/disinfecting the Accu-Chek Inform II system
- 10.3 How to clean and disinfect the Accu-Chek Inform II system
  - Cleaning the meter
  - Disinfecting the meter
- 10.4 Logging maintenance activities
- 10.5 Diagnostics view
- 10.6 Unlocking a Download Lockout
- 10.7 Service menu
11 Troubleshooting
- Errors and unusual behavior without error messages
- Low power icons
- Pop-up messages
- Table of Information, Warning, and Error messages
- Meter reset
12 General Product Information
- 12.1 Technical data
- 12.2 Further Information
A Appendix
- A.1 Table of configuration options
- A.2 Example of barcode symbologies
B Appendix
- B.1 Option: Wireless network (WLAN)
C Supplement for Other Test Entry
- C.1 Before you start
  - Description
- C.2 Overview of Other Test Entry (OTE)
  - Introduction
- C.3 Recording Other Patient Tests
- C.4 Recording Other Control Tests
- C.5 Reviewing Other Test Results
- C.6 Other Test Entry Configuration Options
D Supplement for Observed Test Sequence
- Observed Test Sequence (OTS)
- Using the OTS function
E Supplement for Enhanced Workflows
- E.1 Configurable workflows
F Appendix for Accu-Chek Inform II Base Unit (legacy version)
- F.1 Overview of the base unit with older hardware
- F.2 Connecting the base unit (legacy version)
- F.3 Technical data
G Limited Warranty
- Accu-Chek® Inform II meter LIMITED WARRANTY
Index

Maintenance and Care • 10

153

08424705001 (04) 2021-06 USA • Accu-Chek Inform II Operator’s Manual Version 7.2

Acceptable cleaning/

disinfecting agents

■ To purchase approved disinfecting products,

please refer to your facility’s guidelines, which may

include instructions on direct purchase from the

agent manufacturer or through an approved

distributor. For additional information on product

availability for purchase, refer to manufacturer’s

website: http://www.cloroxprofessional.com

for Clorox

Germicidal Wipes or

http://www.pdipdi.com/ for Super Sani-Cloth

Germicidal Disposable Wipes.

■ Dispose of acceptable cleaning and disinfection

solutions per facility guidelines.

Acceptable active ingredients and products for cleaning

and disinfecting are:

– Clorox

Germicidal Wipes (Environmental

Protection Agency (EPA) reg. no. 67619-12) Pre-

moistened disinfecting cloths (active ingredient 1%

(or less) solution of sodium hypochlorite in water)

– Super Sani-Cloth

Germicidal Disposable Wipes

(EPA reg. no. 9480-4) Pre-moistened disinfecting

cloths (active ingredient 0.5% quaternary

ammonium chlorides and up to 60% isopropanol)

■ Cleaners and disinfectants were validated sepa-

rately and only one cleaning/disinfecting solution

should be used on the device as the effect of using

more than one cleaner/disinfectant interchangea-

bly has not been evaluated.

NOTE: Always use Clorox Germicidal Wipes (EPA reg. no.

67619-12) or Super Sani-Cloth Germicidal Disposable

Wipes (EPA reg. no. 9480-4) to clean and disinfect the

meter. Do not use any other cleaning or disinfecting solu-

tion. Using solutions other than Clorox Germicidal Wipes

(EPA reg. no. 67619-12) or Super Sani-Cloth Germicidal

Disposable Wipes (EPA reg. no. 9480-4) could result in

damage to the system components.

NOTE: Roche has tested the approved cleaning and dis-

infecting product for a total of 12,045 cycles, which is

equal to cleaning and disinfecting after each patient use

simulating 3 years of device use.