Pam ex GC4400 Series Door Closer Installation Instructions Grade 1 Meets ANSI A156.4 Regular Arm Installation Ses Page 2 Para lie! Arm installation See Pages 344 Left Hand Door L8 Right Hang Reverse RHR Top Jamb Installation N3 See Page 5 L6t Hard Door L Digit Hand Reverse RHR « These door closets should NOT be installed on the exposed side (weather side) of exterior doors. NOTE: For special applications, a separate door and frame preparation template is packed with these instructions.
(C4400 Series Door Closer Regular Arm installation Instructions Meets ANSI A156.4 * 2. MARK AND DRILL HOLES (Right Hand Shown} 115/ 2 holes for 17420 (275mm) [{8mm A 614 (159mmj {@5mm} (76mm) (25mm) Tube and toward hinge. g I 4 hues for making Screws . 120° Door Opening An optional mounting plats is required when top rat is. less than 334" (95 mm). Plate requires 2” (5 tmm) minimum top rail. Sect Hand of dos and degree of door opening. Fold template 0n fhe Inge edge of door fine.
Pam ex GC4400 Series Door Closer Top Jamb Arm Installation In: Meets ANSI A156.4 1. PARTS An optional mounting plate s 120" Door Opening Restoration (5], & L) o required where the head frame. y v ‘Select hand of door. Separate template raciness (25nm) () (Sl (180m) face s less than 3-122" (B9mm). suctions “A" and *B", Fold on the Plate requires 1-34” (44mm) minimum head tram. ‘singe doge of door line. Match this ing with the ‘age 008 of ¢nor and attach template to door.
