Installation & Assembly

Operation
Connect the power cable to a 120V 13A supply which is located
in a safe, dry area.
 The switch on the heater is used to control the Heater. When
the position mean on the
【
ON
】
, the first indicator light will
be turn red, the heater will be in standby mode. The
【
OFF
】
position will turn off the Heater.

The panel control:
 When the switch is on the
【
ON
】
position, press the remote
control once, the heater will be on 1500W power. Press the
remote control again, the heater will be in standby mode.
 You can also press the on the panel control . When
the switch is on the
【
ON
】
position, press it once, the
heater will be on 1500W power. Press it again, the heater
will be in standby mode.
 Although the patio heater is waterproof, do not use when
raining or in wet conditions.
 Never connect the power cable from the electrical supply,
when the patio heater is not in use.
Grounding