PVP100 Portable DVD Player User's Guide PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www.palsonic.com.
Contents Foreword Safety Precautions ....................................................................................................... 2 Important Safety Instructions......................................................................................... 3 Panel & Operation Instruction ...................................................................................... 5 Power Supply ...............................................................................................................
Safety Precautions CAUTION: CAUTION THE UNIT EMPLOYS A LASER SYSTEM. TO ENSURE THE PROPER USE OF THE UNIT, READ THIS MANUAL CAREFULLY AND KEEP IT FOR FUTURE REFERENCE. RISK OF ELECTRICAL SHOCK DO NOT OPEN THE LIGHTNING FLASH WITH ARROW HEAD SYMBOL WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED "DANGEROUS VOLTAGE" WITHIN THE UNIT'S CABINET THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS.
Important Safety Instructions 1. READ INSTRUCTIONS All the safety and operating instructions should be read before the product is operated. 9. VENTILATION Slots and openings in the case are provided for ventilation to ensure reliable operation of the product and to protect it from overheating. and these openings must not be blocked or covered. These openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface.
Important Safety Instructions 19. SAFETY CHECK Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition. 14. OVERLOADING Do not overload wall outlets, extension cords, or integral convenience receptacles, as this can result in a risk of fire or electric shock. 15.
Panel Instruction Topper Screen lock Instructor for Stand by Remote receiver Instructor for Charge 5
Panel Instruction Input and Output 9V Power Input Input and Output Optical Digital Audio/Analog Audio Output S-Video Output Composite Video Input/Output Earphone Output Video Input & Output Select Key hold on/off Volume NOTE: This player can also be used as a monitor. Please set the IN/OUT switch as IN, then you can input the CVBS signal by video jack and display on the TFT-LCD panel.
Panel Instruction 4 3 17 16 5 6 7 2 8 9 10 11 12 13 14 1 15 1 Open button 2 Disc topper 3 Speakers 4 LCD Screen 5 Monitor adjustment button 6 Stand by/on button 7 Title button 8 Menu button 9 Status button 10 Next/Fast Forward button 11 Previous/Fast Backward button 12 Enter and Arrow button 13 Pause button 14 Stop button 15 Playback button 16 Mini display 17 Power switch for the screen 7
Panel Operation Instruction Set the OFF-HOLD-ON switch as OFF, and set the OUT/IN switch as OUT status, then the panel operation will be available. 1. Press OPEN button to open the cover, and load the disk. 2. Press STAND BY/ON button to turn on the player. The player will play the disc automatically. 3. Press PAUSE button, the playback will be paused, the mini screen display: press PAUSE continuously, the movie will be played by Step mode, press PLAY to resume. 4.
Panel Operation Instruction 9. During VCD or SVCD playback. Press the STATUS button on the player, the screen will display: Preview Window Menu 04/16 1:05:48 0:03:13 Track Disc time Track time Repeat Bit rate 71 Off Elapsed time of title 0:01:37 Press confirm. button to highlight the item you want to adjust, then press ENTER to Track: Disc time: Track time: Repeat: Time: Instructor of the total tracks number and the current track number. Instructor of the time has been played of the whole disc.
Panel Operation Instruction During DVD playback, press STATUS button, the LCD screen will display: Preview Window Menu 01/01 09/16 5.1CH Off Title Chapter Audio Subtitle Elapsed time of title 0:11:42 Bit rate 45 Show type of Disc Press button to highlight the item you want to adjust, press ENTER to confirm. Title: Chapter: Audio: Subtitle: Angle: Title time: Chapter time: Repeat: Time Disp: Instructor of the current title. Instructor of the current chapter. Instructor of the current audio.
Power Supply 1. Adaptor Power Supply Please connect your Portable DVD player with the power adaptor in the package box. 2. Battery Charging. Please make sure the locks on both player and battery are aimed at line, then push the battery to left, it is installed successfully when you hear a clatter. Note: The charging time is about 5 hours, the working time with screen show is about 3 hours, and the working time without screen show is about 5 hours.
Power Supply 3. Charge: It is strongly recommended to use the adaptor attached in your box for the charging to avoid some possible danger. Adaptor for battery charging Note: During the playback mode, the charging time is a littler longer. If you do not want to use the player for a long time, please make sure the battery is full charged before you save it. Please make sure you are using the power adaptor for charging, not the car adapter.
Remote Controller 1 2 5 6 Power Title P/N Menu Setup Stop Play Pause 3 4 7 8 Display Fast Backward Fast Forward 11 13 PBC ON/OFF Arrow Enter 14 15 Status Next 17 16 Previous Return Number 21 Angle 26 Subtitle 27 9 10 12 18 19 A-B 20 Memory 22 24 Zoom Clear Audio 25 Repeat 23 13
Connect to TV Set Video Plug Audio Plug (Yellow) (Black) White L Red R Audio Input Yellow Video Input NOTE: You can use the S-Video cord to get clearer picture. The S-Video cord is not included in the packaging box. If your want to use your TV set, it is recommended to close the screen of the player and make the volume of player' s speakers minimum.
Playback in Car With the carry bag and power cord special for car use attached, you can also enjoy movies in your car! Please kindly refer the following instructions to setup the player: 1. Connect one tip of the power cord to the player, and the other to the standard 12V jack in the car. Note: This power cord can not be used for charging, just for playback only. Offload the battery before you use the car adaptor as power supplier. Please make sure the power of your car is 12V DC. 2.
System Setting Setup Press SETUP button on the remote controller, and the LCD screen will display: -- General Setup Page TV Type NTSC TV Display Wide Angle Mark On OSD Lang Eng SPDIF Output Captions Off Screen Saver On Set TV Standard Press ENTER or button to come into General Setup. Press or button to select the item. Press ENTER button on the remote controller to confirm. Press SETUP button on the remote controller to quit the setup menu. 1.
System Setting TV Type setup Highlight TV Type to display the submenu, press ENTER or -- General Setup Page TV Type NTSC TV Display Wide Angle Mark On OSD Lang Eng SPDIF Output Captions Off Screen Saver On to confirm. Press button to select. Press ENTER button to confirm. Press to return. Press SETUP button to exit. PAL NTSC PAL ---- PAL output. NTSC ---- compel NTSC output.
System Setting Angle Mark setup Highlight Angle Mark item, press ENTER or -- General Setup Page TV Type NTSC TV Display Wide Angle Mark On OSD Lang Eng SPDIF Output Captions Off Screen Saver On button to confirm. Press button to select. Press ENTER button to confirm. Press to return. Press SETUP button to exit. On Off During the multi-angle disc playback, Set the item as On, the angle mark will display on the screen; Set it as Off to cancel.
System Setting SPDIF Output setup Highlight SPDIF Output to display the submenu and press ENTER or confirm. -- General Setup Page TV Type NTSC TV Display Wide Angle Mark On OSD Lang Eng SPDIF OFF SPDIF Output Captions Off SPDIF/RAW Screen Saver On SPDIF/PCM Setup SPDIF button to Press button to select. Press ENTER button to confirm. Press to return. Press SETUP button to exit. SPDIF Off: Turn off the output of the digital audio. SPDIF/RAW: Output the original signal without being decoded.
System Setting Screen Saver setup Highlight Screen Saver to display the submenu and press ENTER or button to enter. Press button to select. Press ENTER button to confirm. Press to return. Press SETUP button to exit. -- General Setup Page TV Type NTSC TV Display Wide Angle Mark On OSD Lang Eng SPDIF Output Off Captions Off Screen Saver On Off Setup Screen Saver When Screen Saver On, the player will automatically enter screen saver after 3 minutes in Stop or No Disc mode.
System Setting Audio setup Highlight Audio to display the submenu and press ENTER or -- Preference Page Audio ENG Subtitle ENG Disc Menu ENG Parental Password Default button to confirm. Press button to select. Press ENTER button to confirm. Press to return. Press SETUP button to exit. English French Spanish Chinese Japanese Korean Russian Thai This function is subject to the discs.
System Setting Disc Menu setup Highlight Disc Menu to display the submenu and press ENTER or -- Preference Page Audio ENG Subtitle ENG Disc Menu ENG Parental Password Default button to confirm. Press button to select. Press ENTER button to confirm. Press to return. Press SETUP button to exit. English French Spanish Chinese Japanese Korean Russian Thai This function is subject to the discs.
System Setting Enter the correct password to set the desired level. Press SETUP button to exit. Password OK Password setup Highlight Password and press ENTER or -- Preference Page Audio ENG Subtitle ENG Disc Menu ENG Parental Password Default button to confirm. Press ENTER to change your password. Change Change Password Default setup Highlight Default to display the submenu and press ENTER or -- Preference Page Audio ENG Subtitle ENG Disc Menu ENG Parental Password Default button to confirm.
Remote Controller Operation POWER During the playback, press POWER button, the player will stop playback and turn to the standby mode. While the player is in standby mode, press POWER button to resume. 1 TITLE During DVD playback, press the button, the DVD menu will appear on the screen or play from title 1, or be or no effect. 2 The button dose not work during the VCD, MP3 and CD playback. Note: The function is subject to the discs.
Remote Controller Operation During the playback, press the button once, the playback is paused, press Play button again to resume. PAUSE 7 Under the Pause mode, press this button to play by step. PLAY During STOP mode, press this button to resume.
Remote Controller Operation REW Press the button continuously during the playback to review the played program at following speed: 10 2X 4X 8X 16X 32X PLAY Press PLAY button to play normally. FF 11 Press the button during the playback, the playing speed of the disc will cycle as follows : 2X 4X 8X \ 16X 32X PLAY Press PLAY button to play normally. PBC 12 PBC means Playback Control. During VCD/SVCD playback, the button is to control PBC on/off.
Remote Controller Operation PREV During DVD, CD, VCD, SVCD playback, press this button once to play from the beginning of the item (track or chapter) you are enjoying. 16 Press the button twice to play the previous chapter or track. NEXT Press the Button to skip to the next track or chapter. 17 RETURN When the VCD or VCD 2.0 (PBC is on) is playing, press RETURN button to go back to the program menu. 18 During DVD playback, press this button to back to the upper menu.
Remote Controller Operation During playback, press the button to memory the content and status of the current disc. MEMORY Press this button again, it will play from the memory point, meanwhile the player will clear the content and be ready for next memory. 20 Note: The player can memory CD, VCD (or SVCD), DVD three different types of discs. As to the same kind of discs, it can just memory only for one disk, MP3 disks are invalid for this function. This function is unavailable to MP3 disc.
Remote Controller Operation CLEAR Press CLEAR button to delete the digits you have inputted. 23 AUDIO During SVCD playback, press this button continuously to select the audio output you desired, the optional audio is up to 4. 24 During DVD playback, press this button continuously to select the audio output you desired, the optional audio is up to 8.
Remote Controller Operation ANGLE 26 During DVD playback, press the button and you will view the pictures from the different camera angles. Press it once and you view the picture from one camera angle to another. Note: This function is subject to the discs' type. SUBTITLE 27 During DVD playback, press this button to select up to 32 kinds of subtitles. Note: This function is subject to the discs.
MP3 Playback Total time of current track Elapsed time of current track Current director Total directories 00:00 00:00 001/012 Stop \ CD1 Press button to select. CD2 CD3 Press button or ENTER to confirm. CD4 CD5 CD6 Play directory For example select directory 3 to enter the following menu: 00:00 99:59 001/012 Stop \CD3 Press button to select the desired item. ... MP3 1 MP3 11 Press ENTER or PLAY button to play.
MP3 Playback Total time of current track Elapsed time of current track Current track number Total track number 00:20 02:52 003/013 128 Play \CD3 Press button to select track. Press ENTER or PLAY button to play. Press button to back upper menu. ... MP3 1 MP3 11 MP3 12 MP3 2 MP3 3 During the playback mode, press ANGLE button to switch between directory play and file list mode. File List: List all the file names of disc and play them in order.
KODAK Picture CD Playback The introduction of KODAK PICTURE CD A Kodak Picture CD has the size and shape of a regular CD. You can order a KODAK Picture CD simply by checking the box on the photo finishing envelope when you drop off a roll of film (35mm or Advanced Photo System (APS) colour print Film) at the time of processing in Kodak Express store displaying "Kodak Picture CD" sign.
KODAK Picture CD Playback Image Rotation There are four modes to rotate a picture Invert, Mirror, Left and Right. These operations are allowed only when a picture is being displayed normally and will be cancelled automatically when a new picture is displayed.
KODAK Picture CD Playback Digest function During the Picture CD playback, press STOP or MENU button to display twelve pictures at a pro ratio. Press ARROW button to select the desired picture, then press Enter button, the selected picture will zoom into full screen. Press PREV or NEXT button to select the previous or next twelve-picture page. Note: The quality of the picture displaying on your screen is mostly subjected to your display equipment.
JEPG Playback When playing the disc with both MP3 and Picture file, the screen will display the the default MP3 menu as following after reading the disc. 00:00 99:59 001/012 \ Press button to select the desired directory. CD1 CD2 CD3 CD4 JPEG5 JPEG6 Select the directory with MP3 files and the screen will display as following: 00:00 99:59 001/012 \CD3 ... MP3 1 MP3 11 MP3 12 MP3 2 MP3 3 Please refer to the MP3 Playback for the operating process of MP3.
JEPG/WMA Playback Please refer to the KODAK Picture CD for the operating process of JPEG files. You can set the MP3 music as background music during playing JPEG pictures. The operating steps are as following: Open the directory and select one song, press Enter button to play. During MP3 playback, open JPEG picture directory and select one picture, press PLAY button, the player will play the selected song and JPEG picture at the same time.
Troubleshooting Please read the user's manual carefully before using the unit. If you have any troubles in using this player, try to solve the problems by the suggestions mentioned below. If you can not remove the trouble after using all the suggestions, please contact our company or the technical service centre authorised by us. For the sake of your safety, please do not open the cover and repair the player by yourself, if that, it may cause electric shock.
Specifications TFT LCD: 7 inch (16:9) Frequency response: 20Hz ---- 20KHz Horizontal resolution: Over 500 lines Audio SIN ratio: Over 90 dB Display format: 16:9 or 4:3 THD: less than 0.05% Video output: 1.0 Vp-p 0.2 (75 ohms) Audio mixed out: 2.V Audio digital out: 0.5 Vp-p (75 ohms) Weight (N/G): 0.63KGs/1.3KGs Dimension (W x H x D): 190 x 143 x 26.
Attachment 1. Remote Controller 2. Power cord 3. Power adaptor 4. Battery 5.
Using Remote Controller Install the button battery into the remote controller to operate the DVD player. The back of the remote controller If you do not use the remote controller for a long time, remove the battery to avoid possible damage from battery corrosion. + If the remote controller does not function correctly or the operating range become reduced, replace all battery with a new one. The battery can be used 1 year normally. Battery model: CR2025 Operate with the remote controller correctly.
The product complies with the KODAK Picture CD format and will display KODAK Picture CDs. The "KODAK Picture CD Compatible" logo is a trademark of Eastman Kodak Company and is used with permission. To prevent children from watching programs which have a rating above their age, please be sure to set the rating in the setup menu appropriately. Before you set this rating, the password must be unlocked. If you forget your unique password, then please use the universal password as set by the manufacturer.
PALSONIC CORPORATION PTY LTD 1 JOYNTON AVENUE WATERLOO NSW 2017 AUSTRALIA TEL: (02) 9313 7111 FAX: (02) 9313 7555 www.palsonic.com.au PALSONIC CUSTOMER SERVICE TELEPHONE AUSTRALIA: 1300 657 888 FKV2.037.
