DVD5000 User's Manual DVD Player OIGITAL AUOIO
Content Introduction Safety Precautions ................................................................................................................... 2 Important Safety Instructions.................................................................................................... 3 Caution ..................................................................................................................................... 5 Features ..............................................................
Safety Precautions Introduction Welcome to purchase our DVD player. For perfect operation and security, please read the manual carefully and keep it for future reference. CAUTION: THE UNIT EMPLOYS A LASER SYSTEM. TO ENSURE THE PROPER USE OF THE UNIT, READ THIS MANUAL CAREFULLY AND KEEP IT FOR FUTURE REFERENCE.
Important Safety Instructions Introduction 1. READ INSTRUCTIONS 6. CLEANING All the safety and operating instructions should be read before the product is operated. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaner or aerosol cleaner. Use a limp cloth for cleaning. 2. POWER SUPPLY This product should be operated only on condition that the type of power supply corresponds to the marking label.
Important Safety Instructions Introduction 11. OBJECT AND LIQUID ENTRY 16. DAMAGE REQUIRING SERVICE Never push any kinds of object into this product through openings as they my touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill any kinds of liquid on the product. 12. DISC TRAY While the disc tray is opening and closing, let your fingers far from it to avoid hazards from it.
Caution Introduction FOG CAUTION USING CAUTION For safety, please use the original box and packing materials, and the mode of packing same as the original. Fog because of humidity will effect the normal operation of this product. So, please read the following section carefully: When you repackage this product. Do not let this product near the volatile liquid such as insecticide.
Features Introduction Full compatibility with DVD, SVCD, VCD, CD, MP3, CD-R & CD-RW DOLBY DIGITAL and DOLBY PRO LOGIC 5.1 channels or 5 channels decoding DTS digital out Screen saver Multiple playing mode: memory, program, search, 10 seconds reviewed Dynamic spectrum display and 6 frequency bands adjustable Optical and coaxial digital audio output DOLBY DIGITAL 5.
Front Panel and Rear Panel Illustration Introduction Front panel fast backward fast forward power open/close disc tray pause previous ..
VFD Illustration The figure above shows the front panel with all the displays on. Wheel during playback. Illuminate when a MP3 disc is loaded. Illuminate when a CD-DA disc is loaded. 1. Play indicator 2. MP3 indicator 3. CD indicator Illuminate when a DVD disc is loaded. 4. DVD indicator 5. SVCD-VCD indicator Illuminate VCD when a VCD disc is loaded and illuminate SVCD When a Super-VCD disc is loaded. Illuminate during repeat playback. Repeat of chapter(DVD)/track(CD, VCD). 6.
Remote Controller Introduction 1. STANDBY/ON button 4. OPEN/CLOSE button 3. MENU button 2. TITLE button 5. OSD/SETUP button 7. SLOW FWD button 6. Digit buttons 8. Previous/Fast backward button 9. Next/Fast forward button 11. SEARCH button 10. CLEAR button 12. PAUSE/STEP button 14. PLAY button 13. Arrow buttons 17. RETURN button 15. STOP button 16. ENTER button 18. A-B repeat button 19. MEMORY button 20. PLAY MODE button 21. TIMER button 22. EQUALIZER button 25 24. VOL/CH button 23 26.
Connecting to a TV Set RED WHITE Connections YELLOW Notes: Please set the audio out in 2 channel mode. (Refer to the "Audio Setup") There are three ways of connecting the player's AV output to the TV set. 1. S-video cord and audio cord. 2. Video cord and audio cord.
Connecting to an AV Amplifier with 2 Channels Analog Audio Input RED WHITE YELLOW VIDEO IN Notes: 1. Set player's audio out in 2 channel mode. 2. Set the TV set's AV input to the channel you have connected. 3. Set the amplifier's audio input to the channel you have connected.
Connecting to an AV Amplifier with 5.1 Channels Analog Audio Input Notes: 1. Set player's audio out in 5.1 channel mode. 2. Set the TV set's AV input to the channel you have connected. 3. Set the amplifier's audio input to the channel you have connected.
Connecting to an AV Amplifier with Digital Audio Input Notes: 1. Either Optical or Coaxial digital audio output can be selected. 2. Set the player's audio out in Raw or PCM mode. 3. Set the amplifier's audio input to the channel you have connected.
Connecting to Headphones Connections - YELLOW VIDEO IN Before you enjoy the headphones, please: 1. Set player's audio out to 2 channel mode. 2. Turn down the headphone volume to minimum. 3. Connect the headphones as above, and adjust the headphones volume with the volume knob.
Basic Operation Basic Playback Preparation before playing: 1. Connect your DVD player to the TV set and amplifier. 2. Turn on the TV set, and select the AV input to the channel you have connected. 3. Turn down the amplifier volume and turn on the power of amplifier, then select the Audio input to the channel you have connected. After the preparation, you use the DVD player and enjoy the program as following: 1. Firstly, press the power switch, the player will start to work.
Modes and Features Setup Function Illustrations OSD/SETUP In stop mode, press OSD/SETUP key, and the TV screen will display the setup menu as the following: Press key to change the items setup menu A.Press ENTER key to confirm B. Press OSD/SETUP key to return to stop mode Language Setup Select [Language] in the setup menu, and press ENTER key to display the [Language] submenu: Press key to change the items A. Press ENTER or B. Press RETURN or 1.
Modes and Features Setup Function Illustrations Language Setup 2. Select [DVD Subtitle], and press ENTER or key to display the [Subtitle] submenu: Press key to change the items A. Press ENTER key to confirm B. Press OSD/SETUP key to return to stop mode 3. Select [DVD Audio] and press ENTER or key to display the [Audio] submenu: Press key to change the items A. Press ENTER key to confirm B. Press OSD/SETUP key to return to stop mode 4.
Modes and Features Setup Function Illustrations Video Setup Select [Video] in the setup menu, and press ENTER key to display the [Video] submenu: Press key to change the items A. Press ENTER or 1. Select [TV Aspect], and press ENTER or key to setup B. Press RETURN or key to return to the setup menu key to display the [TV Aspect] submenu: Press key to change the items A. Press ENTER key to confirm B.
Modes and Features Setup Function Illustrations Audio Setup Select [Audio] in the setup menu, and press ENTER key to display the [Audio] submenu: Press key to change the items A. Press ENTER or B. Press RETURN or 1. Select [Analog Out], and press ENTER or key to setup key to return to the setup menu key to display the [Analog Out] submenu: Press key to change the items A. Press ENTER key to confirm B. Press OSD/SETUP key to return to stop mode 2.
Modes and Features Setup Function Illustrations Audio Setup 3. Select [ProLogic], and press ENTER or to display the [Pro Logic] submenu: Press key to change the items A. Press ENTER key to confirm B. Press OSD/SETUP key to return to stop mode Notes: [Auto]----It is subject to the disc. [On]----must have Pro Logic decoding [Off]----turning off the Pro Logic decoding This setup is available only when the [Analog Out] is in 5.1 channel mode. 4.
Modes and Features Setup Function Illustrations Rating Setup Select [Rating] in the setup menu, and press ENTER key to display the [Rating] submenu: Unlocked Press key to change the items A. Press ENTER or key to setup B. Press RETURN or key to return to the setup menu 1.
Modes and Features Setup Function Illustrations Others Setup Select [Others] in the setup menu, and press ENTER key to display the [Others] submenu: Press key to change the items 1. Select [Screen Saver], and press ENTER or key to display the [Screen Saver] submenu: Press key to change the items A. Press ENTER key to confirm B. Press OSD/SETUP key to return to stop mode 2. Select [Auto Power Off], and press ENTER or key to display the [Auto Power Off] submenu: Press key to change the items A.
Remote Controller Operation Function Illustrations STAND BY/ON During the playback, press STAND BY/ON key, the player will stop playing and turn to standby mode, and the standby indicator turns on. While the player is in standby, press STAND BY/ON key or any key on the front panel, the player will start to work again, and the standby indicator turns off. TITLE During DVD playback, press TITLE key to display the DVD title content, or play from the first title, or the function is unavailable.
Remote Controller Operation Function Illustrations OSD/SETUP During playback, press OSD/SETUP key to display the current time of the disc playing. Elapsed time of the current track/chapter Remain time of the current track/chapter Press OSD/SETUP key again to display the current information of the disc playing.
Remote Controller Operation Digital keys Function Illustrations These keys are used to input the track, title, chapter numbers and time you want. When the item with digits displays on the screen, press Digital keys to select the desired one, and press ENTER key to confirm. When DVD, CD and VCD(PBCis off) is playing, press Digital keys to select title or track directly, then press ENTER key to confirm. SLOW FWD During playing DVD, VCD or SVCD, press SLOW FWD key to play the program slowly.
Remote Controller Operation Function Illustrations SEARCH Use the digital keys to input the desired [Time] or [Rel-Time] or [Title/Chapter] then press ENTER key to confirm. Notes: 1. During CD playback, press SEARCH key to display the [Track Search] menu, and press it again to display the [Disc Search] menu. 2. During VCD and SVCD playback and when PBC is off, press SEARCH key twice to display the [Disc Search] menu. Notes: 1.
Remote Controller Operation Function Illustrations CLEAR Press CLEAR key to delete the number you have input. It deletes one digital by pressing it once, and deletes all digits by pressing and holding it for over 2 seconds. PAUSE/STOP Press PAUSE/STEP key during playback, and the playback will pause. Press PAUSE/STEP key again, and the picture forwards by a step. Press PLAY key to return to normal playback. Note: The step function is invalid during CD playback.
Remote Controller Operation * Function Illustrations RETURN When the DVD or VCD/SVCD(PBC is on) is playing, press RETURN key to return to the program menu. Press it in setup menu, and the player will return to main menu or stop status. Press it in some function menus, and the current display will be cancelled. A-B During playback, press A-B key to select A point. Press it again to select B point. The player will repeat the section from A to B automatically.
Remote Controller Operation Function Illustrations PLAY MODE Press PLAY MODE key to display the [Play Mode] menu: Press 1. Select [Repeat], and press ENTER or key to change the items key to display the [Repeat] submenu: Press key to change the items A. Press ENTER key to confirm B. Press PLAY MODE or RETURN key to exit the menu Note: CD has no PBC item. 2. Select [Program], and press ENTER or key to display [Program] submenu: Press key to change the items A. Press ENTER key to confirm B.
Remote Controller Operation Function Illustrations While [Program] is on, press ENTER key to display the [Program] submenu: Input the track number you want to play orderly. Then select [Play] and press ENTER key to play the tracks in the order you have set. Select [Clear All] and press ENTER key to clear all the numbers you have input. Select [<<] and press ENTER key to return to the [Play Mode] menu. Input the title number and the chapter number orderly.
Remote Controller Operation Function Illustrations EQUALIZER With equalizer, you can adjust 6 frequency bands independently. Note: This function is invalid for DVD & MP3. Press VOL/CH key, and [Channel/Volume] menu will display as the following: change the items 1. Select [Volume], the screen will display as the following: to adjust the volume Press VOL/CH key again, the menu will disappear. Note: It is unavailable when the Analog Out is set to [5.1 Channel]. 2.
Remote Controller Operation Function Illustrations ZOOM During VCD/SVCD/DVD playback, press ZOOM key to enlarge the picture in a cycle as the following: O 2 O 11 O ANGLE O 3 Off During DVD playback Press ANGLE key, you can view the pictures from the different camera angles. Press it once, you can view the picture from one camera angle to the another. Note: The function is available only when the disc has been recorded the pictures in different camera angles.
MP3 Playing Function Illustrations Supported formats This set supports: Disc format: ISO 9660, Joliet Music file formats: MP3 MP3 bit rate (data rate): 32--320kbps but VBR can not be supported Total number of music files and albums: around 350 Sampling rate: 32kHz/44.
Trouble Shooting Others Please read the user's manual carefully before using the DVD player. If you have any troubles in using this player, try to solve the problems by the suggestions mentioned below. If you can not remove the trouble after using all the suggestions, please contact our company or the technical service centre authorized by us. For the sake of your safety, please do not open the cover and repair the player by yourself, if that, it may cause electric shock.
Specifications Power requirements: ~110-24OV 50/60Hz Power consumption: 25W Signal system: NTSC/PAL Weight: 3.2kg Dimensions: 430mm(W) x 260mm(D) x 75mm(H) (product) Video out Video out: 1.0V(p-p)/75 sync, negative polarity, RCA pin Jack x 1 S-video output connector(separate Y, C signal output connector): Y output: 1.0V(p-p)/75 sync, negative polarity C output: 0.286V(p-p)/75 4 pin mini DIN x 1 Audio out Analog out: 1.85V(rms)/10 Coaxial out: 0.
Remote Controller Preparation Operate with the remote controller correctly. Install the batteries into the remote controller to operate the DVD player. Point the remote controller at the remote sensor and press 1. Open the cover. 1 Others the button. (The pictures of player and remoter are only for reference) 2. Insert batteries (R03). 2 Make sure to match the "+" and "-" of the batteries with the marks inside the battery compartment. 3. Close the cover.