DIGITAL VIDEO DISC PLAYER MODEL: DVD3000 DVD / VIDEO CD / AUDIO CD PLAYER USER MANUAL DIGITAL VIDEO DIGITAL AUDIO PALSONIC CUSTOMER SERVICE TELEPHONE D I G I T A L AUSTRALIA: 1300 657 888 PALSONIC CORPORATION PTY LTD 1 JOYNTON AVE WATERLOO NSW 2017 AUSTRALIA TEL:(02)93137111 FAX:(02)93137555
Catalogue Importont Safetyinformation ............................................................................2 Precautions ........................................................................................................5 Features .............................................................................................................6 Accessories .......................................................................................................6 Basic operation .........................
SAFETY PRECAUTIONS THIS LIGHTING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED "DANGEROUS VOLTAGE" WITHIN THE PRODUCT’S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS.. THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE USER TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE.
Important Safety Instruction CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS GIVEN IN THE USER’S MANUAL AND THOSE MARRED ON THE UNIT. RETAIN THE BOOKLET FOR FUTURE REFERENCE. This set has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated in this unit will protect you if you observe the following procedures for installation, use and servicing.
7. Power-Cord Protection Power -supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product. 8. Overloading Do not overload wall outlets; extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock. 9.
15. Disc Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause serious personal injury and product malfunction. 16 Damage Requiring Service. Unplug this product from the wall outlet and refer servicing to qualified service personal under the following conditions: a) When the power-supply cord or plug is damage. b) If liquid has been spilled, or objects have fallen into the product. c) If the product does not operate normally by following the operating instructions.
l Precautions Please read this precautions before operating this player. Power cord protection n To avoid any malfunction of the unit, and to avoid electric shock, fire or personal injury, please observe the following. l Hold the plug firmly when connecting or disconnecting the AC power cord. l Keep the AC power cord away from heating appliances. l Never put any heavy object on the AC power cord. l Do not attempt to repair or reconstruct the AC power cord in any way.
Dear customers: Thank you for your purchasing of this DVD Player produced . We strongly suggest you carefully read the Operating Instructions and take special note to the precautions listed below before enjoying it. l Features DVD: a completely new dimension in video entertainment. l l l Subtitles may be displayed in one of a maximum of 32 languages *. The audio soundtrack can be heard in up to 8 languages *.
l E. Enjoy the disc content......, you can press the remote key listed below to help enjoying freely: (1)press II key (pause): to pause the playing, press II key again, the player will work again. (2)press the key VOL(+),(-) in remote control unit will change the DVD audio output level. (3)ZOOM key: The image in TV display will zooming up from the center, press the key again, the zoom rate will be doubled, press it third time, the player will return to normal play.
l Front panel and back panel DVD 3000 2 4 6 7 (1) POWER SWITCH (2) MIC 1 JACK (3) MIC VOL LEVEL (4) MIC 2 JACK (5) MIC ECHO LEVEL (6) VFD (7) DISC TRAY (8) OPEN/CLOSE (1) ELECTRICAL SPDIF OUTPUT (2) MIXED AUDIO(L) OUTPUT (3) MIXED AUDIO(R) OUTPUT (4) Dolby 5.1 CH FRONT AUDIO(L) OUTPUT (5) Dolby 5.1 CH FRONT AUDIO(R) OUTPUT (6) Dolby 5.1 CH CENTER AUDIO OUTPUT 6 13 10 9 15 (9) PLAY (10) PAUSE (11) PREVIEW (12) NEXT (13) STOP (14) FAST REVERSE (15) FAST FORWARD (7) Dolby 5.
l Front panel display The figure above shows the front panel with the all displays on. (l)Illuminates when a DVD disc loaded (2)Illuminates when a VCD or CD disc loaded (3)Illuminates during a menu play [limited only to VCD disc with playback control] (4)Indicates playback in PAL system (5)Indicates playback in NTSC system *when both 4 and 5 illuminate, indicates playback in multi-system (6)Illuminates when viewing angle of scenes could be changed.
l Basic connection l l l Set the power switches on the player and equipment to be connected to OFF beforeconnecting. Read through the instruction for the equipment to be connected. Be sure that the colors of the connectors and plugs match up when connecting the cord. Connecting to a TV with stereo sound A 1. TV set (optional) 2. DVD player 3. Audio/Video cord (supplied) 4. S-video cord (optional) 5. To audio input connectors (red, white) 6. To video input connector (yellow) 7.
electrolyte may leak which may lead not only to malfunctioning but also to rust if contacting with the electrolyte. l Wipe away any electrolyte leaking inside the remote control unit, and install new batteries. l If any electrolyte should come into contact with parts of your skin, wash it off thoroughly with water. C Remote control unit operating range Point the remote control unit no more than 7m from the remote control sensor and about 60 of the front of the unit.
the TV input. Switch on the stereo system’s power if the player has been connected to a stereo system. Standby status: Press the power switch key in the remote control unit, the DVD player will enter into its standby status, press the key again, the player will work normally. As this key does not control the power supply switch, please turn off the power switch after enjoying the discs. Basic play: 1.
*Note: During playing, the functions may differ depending on discs. Pause Press the “PAUSE” button ( or the " key in the remote control unit) during play. Normal play is resumed when the " " (confirm /play) key or the " key in the remote control unit is pressed. Slow-motion play In the play status or still picture status, press the " " key (slow-motion) in the remote control unit once means play in 1/2 speed, press it two times means play in 1/4 speed, press it three times means play in 1/8 speed.
Repeat of chapter being played CHAPTER REPEAT ON TITLE REPEAT ON Repeat of title being played Cancel repeat REPEAT OFF To return to normal play Press “repeat” key several times until “REPEAT OFF” displayed in the unit’s display. Notes: Repeat play works only with discs for which the elapsed playing time appears on the unit’s display during playback. Repeat play may not work correctly for some discs. A-B: Repeating sections between two specific points (A-B repeat) 1.
3. Adjust the microphone volume. 4. Adjust the echo level (if necessary). Note: If you hear strange noises (squealing or howling) while using the KARAOKE feature, move the microphone away from the speakers. Turning down the microphone volume or the speaker volume is also effective. Pull out the microphone after enjoying the KARAOKE. Subtitle 1. Clearing/Displaying of subtitles: If a disc has subtitles recorded on it, they can either be cleared or displayed on the TV monitor.
General page Dolby Digital Settings GENERAL PAGE TV DISPLAY NORMAL/PS* NORMAL/LB WIDE TV TYPE MULTI* NTSC PAL ANGLE MARK ON* OFF OSD LANG ENGLISH CHINESE* AUDIO OUTPUT ANALOG* SPDIF/RAW SPDIF/PCM CAPTIONS ON OFF* SCREEN SAVER ON OFF DOLBY DIGITAL SETTINGS OPERATIONAL LINE OUTPUT* RF REMOD DUAL MONO STEREO* LEFT MONO RIGHT MONO MIXED MONO DYNAMIC RNG Preference Page PREFERENCE PAGE AUDIO ENGLISH* FRENCH SPANISH CHINESE JAPANESE SUBTITLE ENGLISH* FRENCH SPANISH CHINESE JAPANESE OFF S
Note: (1) When connecting 5. lch, center speaker, rear speaker and subwoofer speaker is in on status. (2)For changeable of software, there may appear some menu display different from exact function above, but it is not affect function of the player. SET UP 1. Press "SET UP" in the STOP mode. The TV monitor may display an image such as the main page shown above. The image may differ depending on the software versions adopted. 2. Press " key to select the item shown in the main setting page.
Mode Press "MODE" key to select play with left sound track, right sound track or stereo sound and so on. This mode satisfies to realize bilingual function. Catalogue menu This function is effective only in STOP status Press the "MENU" key, then press the number key according to the needed function. There are four possible selections: 1.Browse. 2. Total disc. 3.Single program. 4.
Program Programming play PBC OFF status. Press "PROGRAM" key in the stop mode, the "Programming" will be displayed in the screen. Continuously press the number key to select the program you wanted. If you want to see Program 2,6,8,12,16 you only need to press 2,6,8,+10,2,+10,6 Continuously Press " key to commence the play in the order you select. The text “program” and the title you selected will illuminate in the front panel display.
VOL(+)(-): Audio output control Press the "VOL(+)", "VOL(-)" to control the audio output level in 16 steps. Note: If you hear strange noises (squealing or howling) ----Move the microphone away from the speakers. ----Turning down the TV volume or Audio amplifier volume. ----Turning down the microphone volume or echo volume. MP3 and CD disc play A:Switch on the "POWER" button in the front Selecting by Number panel of the unit.
Troubleshooting Before requesting service for this unit, check the chart below for a possible cause of the problem you are experiencing. Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper operation. Symptom(Common) No power Play fails to start even when " " (confirm /play) is pressed. Play commences but then stops immediately. No picture. No sound. Distorted sound. Picture is distorted during rapid advance or rapid reverse.
General Specifications POWER SUPPLY POWER CONSUMPTION: TV SYSTEM: WEIGHT: DIMENSIONS(WxDxH): AC 110-240V, 50/60Hz 30W PAL/NTSC 4.5Kg 430mm x 300mm x 92mm (except jut) ENVIRNMENTAL SECTION TEMPERATURE: HUMIDITY: +5~+350 C 5~80% (condition of no jew) Discs playback: (1) DVD (2) SUPER VCD (3) VCD AND AUDIO CD S-VIDEO output Y output: C output: VIDEO output: Horizontal definition 1.0Vp-p(75 ohms) 0.286Vp-p(75 ohms) 1.
