User's Manual

ManualsBrandsPalovue ManualsComputers & AccessoriesBluetooth 5.0 Hi-Fi Audio Adapter

User Manual

Bluetooth 5.0 Hi-Fi Audio Adapter

Product Introduction

This product is a Bluetooth 5.0 Hi-Fi Audio Adapter with an integrated design of power

supply and audio output. The shell is made of zinc alloy. It can provide Bluetooth reception

for speakers and cars without Bluetooth function. It can transmit audio from mobile

devices such as mobile phones or tablets to devices such as speakers or cars via

Bluetooth.

Product specification

Name Bluetooth 5.0 Hi-Fi

Audio Adapter

BT version 5.0

SNR 100dB Frequency 20Hz~20KHz

Power Supply 500mA Range 10m

Temperature -10℃~60℃ Humidity ≤90%

Features

● Bluetooth 5.0 Version

● High Sensitivity Microphone

● Creative smart device

● Supports Handsfree

● Supports Prev/Next song

Summary of content (5 pages)

PAGE 1
User Manual Bluetooth 5.0 Hi-Fi Audio Adapter Product Introduction This product is a Bluetooth 5.0 Hi-Fi Audio Adapter with an integrated design of power supply and audio output. The shell is made of zinc alloy. It can provide Bluetooth reception for speakers and cars without Bluetooth function. It can transmit audio from mobile devices such as mobile phones or tablets to devices such as speakers or cars via Bluetooth. Product specification Name Bluetooth 5.0 Hi-Fi BT version 5.
PAGE 2
Installation Guide 1. Connect the USB power supply port of the product to the charger and it would be power on automatically. 2. Connect the 3.5mm audio jack with your speaker interface or your car AUX port. Connection Guide 1. After the wireless audio receiver is turned on, the blue light flashes quickly, indicating that it has automatically entered the pairing mode. 2. Turn on the Bluetooth function of your phone or tablet device and click Search. 3.
PAGE 3
product if you have matched the original car Bluetooth before, so as to ensure smoother use of our product Note: The pairing mode only lasts for 10 minutes. After 10 minutes, the LED light will enter a slow flashing standby mode. If you need to re-enter the pairing mode, please power off the product and restart it. Product Diagram FAQ Q： How much power is needed? A： Please use 5V/500mA power supply. If the current is too high, the equipment may be damaged.
PAGE 4
Q：Will there be an electric current sound? A：This will happen to a few users. Current noise is usually caused by power supply, and different vehicle noise will be different. If it occurs, it can be avoided by following settings. 1. Turn the car down and the mobile phone up. 2. Try to use the car with its own USB power supply or mobile power supply, do not use the cigarette lighter car charging, because the cigarette lighter is the engine power supply, the current is unstable.
PAGE 5
this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.