User's Manual
User Manual
Bluetooth 5.0 Audio Adapter
Product Introduction
This product is a Bluetooth Audio Adapter, power supply and audio output as one. The shell
is made of zinc alloy material, it can provide Bluetooth function for speakers and cars without
Bluetooth function, audio from mobile devices such as mobile phones and tablets can be
transmitted to the speakers or cars via this adapter.
Product specification
Name
Bluetooth 5.0 Audio
Adapter
BT version
5.0
SNR
92dB
Frequency
20Hz~20KHz
Power Supply
500mA
Range
10m
Temperature
-10℃~50℃
Humidity
≤90%
Features
● Bluetooth 5.0 Version
● High Sensitivity Microphone
● Creative small device
Installation Guide
1. Connect the USB power supply port of the product to the charger and power on
automatically.
2. Connect the 3.5mm audio jack to your speaker or car via AUX port.
Connection Guide
1. The Audio Adapter will automatically enter pairing mode once power on. .
2. Open the Bluetooth function on your mobile phone or tablet and click search.
3. Click“Palovue Linkflow” once appear.
4. The Audio Adapter will automatically re-connect next time once power on.
Note: The pairing mode lasts only 3 minutes. After 3 minutes, the LED lights will enter the
slow flash standby mode. If you need to enter the pairing mode, please restart the product
after power failure.