User Manual

5
DEUTSCHFRANCAIS
ESPAÑ OL
ENGLISH
ITALIANO POLSKI
INTRODUCTION
The regulated Palmer Universal power supply unit for the Palmer PEDALBAY 40 oers 8 low-voltage outputs
for powering guitar and bass guitar eects devices. Built into the pedalboard, it oers convenient and
organised wiring, and looks tidy. Even during transport, eects devices can remain wired thanks to the
special metal guard strip that protects connected low-voltage wires against damage and unintended
removal. Four attachment points in the metal section are positioned to facilitate permanent and secure
attachment of the wires with cable ties. A suicient number of low-voltage wires with standard 2.1 x 5.5 mm
coaxial power connectors are included.
CONNECTIONS, OPERATING AND DISPLAY ELEMENTS
1
INPUT
Low-voltage connector for supplying power to the power supply unit (12 V DC / 2 A, outside: positive).
Please use only the provided power adapter, to protect the power supply unit from damage and to ensure
suicient and safe power supply for all connected eects devices.
2
OUTPUT
Low-voltage connector for forwarding the power supply connected to the INPUT socket.
3
POWER
Device ON/OFF button.
4
POWER LED
The POWER LED lights up as soon as the device is correctly connected to the power supply and
switched on.
5
DC OUTPUTS
Six low-voltage connectors, each with a 9 V DC and maximum 300 mA current for connecting eects devices
with the corresponding load values (9 V DC / outside: positive / up to 300 mA).
PANTONE Warm Gray 8C
PANTONE Warm Gray 8C
2
1
4
3
PANTONE Warm Gray 8C
PANTONE Warm Gray 8C
6
5