Palmer Audio Tools Brochure

bestätigen, seien die folgenden Highlights genannt: 19“ Träger aus
4mm Stahlblech, alle XLR-Buchsen aus Metall (Neutrik DL-Serie) mit
dem Gehäuse verschraubt und über Kabel mit der Platine verbunden.
Alle Ein- und Ausgänge standardmäßig galvanisch durch Übertrager
getrennt, integriertes Monitoring über Kopfhörer und LED-Anzeige.
Im Detail: Die PSB243 ist eine Stagebox mit 24
Mikrofoneingängen. Jeder Eingang steht als 3-fach gesplittetes
Ausgangssignal galvanisch getrennt zur Verfügung. Eine aktive
Elektronik sorgt dafür, dass weder Klang - noch Pegelverlust zu
befürchten sind. Jeder Kanal kann durch einen Monitor-Taster auf den
Kopfhörerverstärker und das 10-fach LED-Meter geroutet werden.
Damit ist eine perfekte Überwachung des Eingangsignals möglich.
Zur besseren Auflösung kann das Signal für die Meter-Anzeige in den
Stufen 10dB, 20dB, und 30dB angehoben werden. Die LED-Kette
selbst umfasst den Anzeigebereich von -40dBu bis +10dBu. Die
Lautstärke des Kopfhörers ist kontinuierlich einstellbar.
Individuell für jeden Kanal ist eine großzügig
dimensionierte rausch- und brummfreie
Phantom-Speisung zuschaltbar.
In einem 7HE großen Gehäuse sind auf der
Frontplatte 24 XLR/f- Buchsen untergebracht.
Daneben sind 24 XLR/m-Buchsen vorhanden.
Diese Buchsen lassen sich intern über eine
Steckverbindung entweder als passive
Parallelbuchse oder als trafogetrennter aktiver
Splitausgang konfigurieren. In der
letztgenannten Variante steht ein individueller
Ground-Lift-Schalter zur Trennung des Erdpotenzials
zur Verfügung.
Diese Ausgänge dienen als "Gastausgänge“. Zusätzlich sind auf der
4
Technical details :
The PSB243 is a stage box with 24 inputs. Each input has 3
transformer balanced outputs. The active circuit ensures no loss of
signal or sound quality. Each channel can be routed to the headphone
output and 10-point LED strip by the monitor push-button, allowing
you to accurately monitor the input signal. A 10dB, 20 dB, and 30dB
boost function is provided for better meter resolution. The LED strip
itself displays a range from 40dBu to +10dBu. The headphone output
is adjustable. Each channel has a hum-free, stabilized and individually
switchable phantom power.
The 7-space chassis houses 24 XLR/f- input sockets. The 24 adjacent
XLR/m- sockets can be internally wired as parallel thru outs or as
transformer isolated active split outs. As such, there´s an individual
ground lift switch provided. These outputs are intended for recording.
The front side furthermore offers space for an additional 12 XLR
sockets. These may be custom fitted and wired as returns, intercom
or additional inputs. A further 6 channels may be added on request.
The rear features three large bays. We currently offer mounting plates
for the following multi-pin footprints : the
108-pin Harting type and the circular 85-pin
Litton-Veam/LK type connector the 100-159
pin LK40 shell size also fits. Since only 2
multi-pin connectors are usually needed for
the main and monitor desks, the third bay
may be used for a sub stage box ( CaCom) or
additional XLR sockets. The rear of the
device also features a Neutrik Powercon
connector for the mains supply, fuse and
mains switch, as well as a ground lift to
separate electronics from chassis, a ground terminal, and one
4-pin XLR/m for back-up power. An individual ground switch for each
multi-pin connector is provided. Each output is internally wired to the
multi-pin with a 3-pin header (ground,+V, -V, +48V). Connector sets
PSB 243
Mains Input Harting Multi-pin
Headphone amplifier
LED meter
Litton/Veam Multi-pin