Palmer Audio Tools Brochure

PSU / PHANTOM POWER
Das PW 10II ist ein Netzteil mit Havariefunktion und integrierter Rackbeleuchtung
zur Versorgung von maximal 10 Modulen PRM-LD (40Kanäle). Zur Vermeidung eines
Totalausfalls ist es aus mehreren getrennten Einzelkreisen aufgebaut. Ein zusätzlicher Kreis
steht im Standby Modus zur nahtlosen Übernahme der Versorgung bei Ausfall eines
Netzteils bereit. Ein extrem leiser Lüfter sorgt für "kühle" Betriebsbedingungen. Die
Rackbeleuchtung arbeitet mit handelsüblichen 12V Glühbirnen. Neben einem separaten
EIN-Schalter ist die Helligkeit in 2 Stufen schaltbar.
The PW 10II is a power supply unit with integrated backup facility and rack lighting
for up to 10 PRM-LD10 (40 channels).
A series of independent circuits prevent total failure. An additional circuit is kept in standby
mode to ensure smooth changeover to the backup power supply in the case of power
failure. A virtually silent fan provides a cool air supply during operation. The rack lighting
uses standard 12V light bulbs. It has a separate ON/OFF switch and two brightness levels.
PW 10 II
PW 4
Netzteil zur Versorgungvon 4 Modulen PRM-LD oder 2 PPB 20
2 getrennt aufgebaute Kreise ergeben gute Sicherheit gegen Totalausfall.
PAN 48
Palmer PAN 48 ist ein Gerät zur externen Spannungsversorgung phantom-
gespeister Geräte. Auf Grund der hohen Stromleistung von total 20 mA ist die Anwendung
nicht nur auf Kondensatormikrofone beschränkt, PAN 48 eignet sich auch hervorragend,
um z. B. phantomgespeiste aktive DI-Boxen zu versorgen. Die Box ist zweikanalig
ausgelegt.
The Palmer PAN 48 is a unit for the external power supply of phantom powered
appliances. Due to the high current level of a maximum of 20mA, the application is not just
limited to condenser microphones. PAN 48 is excellent for supplying phantom powered
active DI-boxes. The box has two channels.
PW 4 Power supply unit for 4 PRM-LD modules or 2 PPB 20s.
Two independent circuits to guard against complete failure.
12
PW 10 II - TECHNISCHE DATEN / SPECIFICATIONS
Inputvoltage230VAC, (othervoltageratings on request)
Outputvoltages:
5 x±18VDC,350 mA each; 5 x +48VDC, 80mAeach
Additionalbackupcircuit is activated viaadiode array
Outputsockets:10 x 4 pin XLR/f
Totalof6 x 3 LEDs indicating operating voltages
Rack lighting:Max. 30 Watts,2switchable levels
BindingPostfor „star" grounding system
Failsafe circuit for power switch
Housing:19",2 U, approx. 200mmdeep
with topprojecting50 mm over the front plate.
PAN 48 - TECHNISCHE DATEN / SPECIFICATIONS
2 channels,eachchannel:
Microphoneinput:XLR/f Pin 2 3 +48VDC, Pin 1 Ground
Output:XLR/mno DC voltage
Groundliftswitch
Phantompowerstabilized ±5%. Low ripple, low noise Max.current20mA totally.LED control.
&
Metalcasing110 x 110 x 45 mm
PW 4 - TECHNISCHE DATEN / SPECIFICATIONS
Input voltage:230VAC (othervoltageratings on request)
Outputvoltages:2 x ±18VDC, 400 mA each, +48VDC,150mA
Outputsockets:4x4pinXLR/f
3 LEDspercircuit, indicating operating voltages
Housing:19",1 U, approx. 160mmdeep.