User manual

EN
EN FRDE ES
INSTALLATION & OPERATING:
1
GROUND LIFT SWITCH
WiththeABOyoucaninterconnect
two mains powe red devices (for
example2mixers).Thisconstel-
lation can induce a ground loop
hum.Shouldthisoccur,usethis
switch to lift the ground of the
second output.
2
SWITCH
Withthisswitchyoucantoggle
between the two outputs. The
switchislatching,theLEDindi-
cates,whichoutputisactive.
3
INPUT
(Note: Only dynamic mic and such
that do not require phantom pow-
er.)Connectamicorlinesignal
to this input
Outputs: The input signal is
switched to either output A or B
(LEDon).
4
PAD OUTPUT A
Usethisswitchtoattenuatethe
outputAby15dB.
5
PAD OUTPUT B
Tooffermoreflexibility,out-
put B can be padded in two steps
(15dBor6dB).Bothswitchescan
be used simultaneously to acheive
maximumpading.
6
LED
LED: This LED lights when output
B is selected (Note: A battery
mustbeinserted)
PANELS
GND
3
6
1
5
4
2
3453
5