MSDS

HRW-041 – Sky-Blue Page 5/8
Date of Issue: 29-APR-2015 Status: FINAL
Acute Toxicity Hazard Additional Information LC50/LD50 Data
Inhalation Unlikely to be harmful >5.2 mg/L (mist)
Dermal Unlikely to be harmful > 2 g/kg
Oral Unlikely to be harmful > 5 g/kg
deficient (less than 19.5 percent oxygen) situations, or under conditions that are immediately dangerous to life and health (IDLH).
Other Protective Equipment: Eye wash and quick-drench shower facilities should be available in the work area. Thoroughly
clean shoes and wash contaminated clothing before reuse.
Suggestions provided in this section for exposure control and specific types of protective equipment are based on readily
available information. Users should consult with the specific manufacturer to confirm the performance of their protective
equipment. Specific situations may require consultation with industrial hygiene, safety, or engineering professionals.
SECTION 9: Physical and chemical properties
Note: Unless otherwise stated, values are determined at 20°C (68°F) and 760 mm Hg (1 atm). Data represent typical values and are not intended
to be specifications.
Appearance: Clear blue Flash Point: 100 - 150 °F / 38 - 66
°C
Physical Form: Liquid Test Method: Tag Closed Cup (TCC), ASTM D56
Odor: Kerosene Initial Boiling Point/Range: 300 - 572 °F / 149 - 300 °C
Odor Threshold: No data Vapor Pressure: 0.40 mm HG
pH: Not applicable Partition Coefficient (n-octanol/water) (Kow): No data
Vapor Density (air=1): > 4.5 Melting/Freezing Point: < -40 °F / < -40 °C
Upper Explosive Limits (vol % in air): 7.0 Auto-ignition Temperature: 410 °F / 210 °C
Lower Explosive Limits (vol % in air): 0.7 Decomposition Temperature: No data
Evaporation Rate (nBuAc=1): <1 Specific Gravity (water=1): 0.775-0.840 @ 68ºF (20ºC)
Particle Size: Not applicable Bulk Density: 6.73 lbs/gal
Percent Volatile: 98-100% @ 545ºF (285ºC) Viscosity: 1-2.4 cSt @
40°C Flammability (solid, gas): Not applicable Solubility in Water: <0.1%
SECTION 10: Stability and reactivity
Reactivity: Not chemically reactive.
Chemical stability: Stable under normal ambient and anticipated conditions of use.
Possibility of hazardous reactions: Hazardous reactions not anticipated.
Conditions to avoid: Avoid high temperatures and all sources of ignition. Prevent vapor accumulation.
Incompatible materials: Avoid contact with strong oxidizing agents and strong reducing agents.
Hazardous decomposition products: Not anticipated under normal conditions of use.
SECTION 11: Toxicological information
Information on Toxicological Effects
Substance / Mixture
Aspiration Hazard: May be fatal if swallowed and enters airways.
Skin Corrosion/Irritation: Causes skin irritation. Repeated exposure may cause skin dryness or cracking.
Serious Eye Damage/Irritation: Causes mild eye irritation.
Skin Sensitization: Not expected to be a skin sensitizer.