User's Manual
Table Of Contents
- MicroCorr( Digital
- Users Guide
- MicroCorr( Digital Users Guide
- MicroCorr( Digital Users Guide
- Keypad functions
- _
- Using the MicroCorr( Digital Correlator
- Step 1: Charging and installing batteries
- Step 2: Set up and deployment of Out Stations
- Step 3: Switching on the Correlator
- Correlating
- Main Menu
- Correlate
- File
- Regression Analysis
- Set-up
- Test and Service
- Other System Options
- Correlation Screen
- Pipe data
- Zoom
- Peak Suppression Screen
- View Settings
- Calculate Velocity
- Filters
- Program upgrade (Software and Firmware)
- Upgrade Information
- The File Menu
- The Unit Type Menu
- _
- Technical Specification
- _
- _
- _
- _
- _
- Base station
- ProcessFull digital correlation
- Frequency response0.1 to 5000Hz
- Filter selectionAutomatic Parametric Filtering
- Resolution(0.1m
- DisplayBacklit colour ¼ VGA
- Antennae External antenna/magmount
- Mixed material6 sections
- Correlation filesUp to 30 files stored
- Battery level indicationFor all system units
- Battery typeRechargeable Lithium ion batteries, field replaceable
- Battery life>24 hours continuous use without backlight
- Key functionsCombined correlation/survey mode
- LanguageSelectable via menu
- Operating softwareUser upgradable from www.palmer.co.uk
- Printer outputRS232 to parallel printer
- PC downloadVia PC software, Windows compatible
- Dimensions220mm x 250 x 100mm
- Weight1.8Kg
- Operating temperature-15(C to +50(C
- Shock protectionDrop tested to 1 metre
- EnvironmentalIP65
- EnclosureFully injection-moulded ABS
- ConnectorsMilitary specification Amphenol
- DiagnosticsSelf-test and auto-calibration on power-on
- Radio communicationSingle frequency digital transceiver
- Radio frequencyUHF (local regulations apply)
- ControlsON/OFF (all functions remotely controlled and monitored from Base station) with LED status light
- ConnectionsHeadphones
- Battery typeRechargeable Lithium ion batteries, field replaceable
- Battery life>18 hours
- Hazard indicationFlashing lights (2)
- AntennaExternal antenna
- PortabilityIntegral sensor stowage
- Dimensions210 x 145 x 305mm
- Weight1.6kg
- Environmental IP68
- Housing Fully injection-mouled ABS
- ConnectorsMilitary specification Amphenol
- Shock protectionDrop tested to 1 metre
- TypeDigital sensor with integral high strength magnet
- Frequency range0.1 to 5000Hz
- Dynamic range>90dB
- Dimensions180mm x 50mm diameter
- Weight 1kg
- EnvironmentalIP68, rubber shroud for shock protection
- Connection to Out Station2m cable with strain relief
- _
- _
- _
- _
- _
- Warranty
- Patents
- _
9
Features of the Out Stations
The Out Station consists of a transmitter unit (red, blue – or optionally yellow) and a digital
sensor unit complete with cable to connect to the transmitter. Its design incorporates sensor
stowage and cable wrap.
Sensor
stowage
at rear
Flashing
hazard
lights
Cable with
strain relief
Digital
sensor
High
strength
magnet
Cable wrap
Battery compartment
(accessed from underside)
Injection moulded
housing
Military
specification
connectors
Detachable
antenna