User's Manual

Table Of Contents

Press 6(Power Saving)

Press 1 to toggle the System power off between NEVER and 5, 10, 15, 20, 25, 30, 35, 40, 45,

50, 55 and 60 minutes duration.

Press 2 to toggle the Backlight off between NEVER and 5, 10, 15, 20, 25, 30, 35, 40, 45, 50,

55 and 60 minutes duration.

Press 7(Display set-up)

Press 1 to incrementally decrease the screen brightness.

Press 2 to incrementally increase the screen brightness.

Press 3 to incrementally decrease the screen contrast.

Press 4 to incrementally increase the screen contrast.

Press 8(Control beacons)

Press 1 to switch On the flashing beacons on the transmitters.

Press 2 to switch Off the flashing beacons on the transmitters.

Note. The beacons should be

checked when switched on from the

control unit as they will only switch on

if they are within range to pick up the

signal.