assembly Instructions

Installation manual - English
B. Hard surface installation
When installing the house on a hard surface, use pillar legs (4 pcs), Art. 73808 (manufactured from structural
steel S235, material thickness at least 2 mm). NB! The pillar legs are not included in the supplied kit!
Pillar leg
Bolt, nut, washer
Wedge anchor
Put the pillar legs on the pillar ends and shift the house to the desired place. Drill holes in the base surface and
attach the pillar shoes with wedge anchors. Drill holes in the wooden pillars and attach with bolts.
NB! When installing the house on a hard surface, to reduce fall hazard you should fill the surface under and
around the house with mulch or another soft material. You can also use special anti-impact mats designed for
playgrounds.
3 Maintenance manual
It is recommended to inspect the house thoroughly every 6 months. Regular painting of the house will prolong
its useful life substantially.
You should also check the condition of the roof to discover any leaks as early as possible. Eliminate leaks as
you find them to prevent rainwater from damaging the roof and other wooden parts of the house.
Make sure that all screws and bolts are firmly fastened. In lengthy periods of dry weather wood can shrink and
the screw/bolt spots attachments can become weak. Conduct regular checks and tighten the screws/bolts as
necessary!
Be especially attentive when checking barrier and stair attachments and how the pillars are fastened to the base
surface.