User guide

SYNCHRONIZING INFORMATION
SETTING UP WIRELESS SYNCHRONIZATION
80
4
CHAPTER
information you want to synchronize
with the Exchange Server.
9 (Optional) Highlight one of the items
and select Settings to change the
synchronization settings for that type
of information. Settings are not available
for all items.
10 Press Finish (right action key).
Synchronization with your Exchange
Server begins automatically. A status
bar appears onscreen, indicating sync
progress.
You can set a schedule for synchronization
to take place any time info is updated on
either your Treo 750 or the server or at
certain intervals (see Setting the
synchronization schedule), or allow
synchronization to take place only when
you initiate it manually (see Initiating a
wireless sync manually).
Setting the synchronization schedule
You can set a synchronization schedule in
either of the following situations:
• If your Microsoft Exchange Server
2003 is upgraded to Service Pack 2:
By default, wireless sync takes place
any time info is updated on either your
Treo 750 or the server using Direct Push
Technology. To save battery life,
however, you can set synchronization to
take place at intervals that you specify.
• If your Microsoft Exchange Server
2003 is not upgraded to Service
Pack 2: By default, wireless sync does
not take place automatically. Set a
synchronization schedule to have sync
take place either any time info is
TIP To automatically download more of an
incoming email message than the default
setting, select E-mail in step 9 and increase
the KB setting. If you don’t increase this
setting, you can manually download the rest
of the message at your convenience.