SM Setting Up Your Sprint Power Vision Smart Device TreoTM 700p by Palm © 2006 Sprint Nextel. All rights reserved. SPRINT, the “Going Forward” logo, and other trademarks are trademarks of Sprint Nextel.
Expansion Card Slot Ringer Switch Stylus Earpiece Indicator Light (alert and charge indicator) Volume Button Side Button Power/End Button Applications Button Talk Button Messaging Button Phone Button 5-way Navigator and Center Button Calendar Button Menu Button Setting Up Your Treo 700p Smart Device Your Treo 700P Smart Device 1
Before you begin using your Treo 700P smart device, there are a few simple steps you’ll need to take care of: 1. Set Up Your Device. 2. Make Your First Phone Call. 3. Connect to Your Computer. Once you’ve completed these simple setup procedures, you’ll be ready to begin using all the exciting features of your Treo 700P smart device.
1 Set Up Your Device.
a. Remove the battery door. b. Insert the battery. c. Replace the battery door.
a. Confirm that the date and time are correct, and select Next. If the date or time is incorrect, uncheck the Get date & time from mobile network box, select the correct date or time, and then select Next. b. Read through the screens to learn about three key features of your device. c. When you’re finished, select Done. Tip: If your device screen turns off, press Power/End to wake up the screen.
2 Make Your First Phone Call. Check Your Device To use your device's phone, press Phone . If Sprint appears in the upper-left corner, your phone is ready to use; skip ahead to “Make a Call.” If Locked appears in the upper-left corner, you need to unlock your device. Using the keyboard, enter your four-digit lock code.
a. b. Press Phone . Enter the number you want to call. Tip: There are two ways to enter a phone number: press the numbered keys on the keyboard, or use the stylus to tap the onscreen buttons. c. Press Talk to dial. d. After you finish the call, press Power/End Talk to end the call.
a. Press Phone . b. On the keyboard, press and hold 1. c. Follow the system prompts to: • Create your password. • Record your name announcement. • Record your greeting. • Choose whether or not to activate Skip Pass Code (a feature that lets you access your voicemail simply by pressing and holding 1, bypassing the need for you to enter your password).
3 Connect to Your Computer. Install the Software IMPORTANT: You must install the software that came with your Treo 700P device even if you already have Treo software installed on your computer. a. Insert the Palm Software Installation CD into your computer’s CD drive. b. On a Windows computer, follow the onscreen instructions to install the software. On a Mac computer, double-click the CD icon, and then double-click PalmSoftware.pkg. c. When prompted, connect your device and your computer.
a. When prompted to synchronize, press the sync button on the USB sync cable. Tip: b. During the installation process on a Windows computer, you can select to synchronize with Outlook. When synchronization is complete, press Applications to view and start using the applications.
Explore these resources to learn how to use your device: Quick Tour: Introduces you to your device’s features. Press Applications select Quick Tour . and Getting Started Guide: Shows you how to move around on your device, set up features (such as voicemail and email), and perform common tasks. User Guide: Provides step-by-step instructions and explanations of all your device’s features. To access the User Guide on your desktop computer, click Start > Programs > Palm > User Manuals > Treo700pUG_Sprint.pdf.
