User's Manual

YOUR CONNECTIONS TO THE WEB AND WIRELESS DEVICES
CONNECTING TO A WI-FI NETWORK
170
8
CHAPTER
• To remove the network settings from
memory, so that your smartphone does
not automatically connect to this
network the next time you are within
range and the Wi-Fi feature is turned on,
press Menu (right softkey) and select
Remove Settings.
Customizing Wi-Fi settings
1 Press Start and select Settings.
2 Select the Connections tab, and then
select Wi-Fi Prefs . The Main and
Advanced tabs show the status of the
Wi-Fi feature and display information
about an active Wi-Fi connection.
3 Select the Power Mode tab and set any
of the following:
Power Save Mode: Adjusts power
consumption between maximizing
network connection performance and
maximizing battery life.
Connection: Sets when the Wi-Fi
feature is on and when your
smartphone attempts to search for
networks.
• On button press: Leaves the Wi-Fi
feature off until you press Wi-Fi
to turn it on. After you turn the Wi-Fi
feature on, your smartphone searches
for available networks. If a network to
which you previously connected is
available, your smartphone
automatically connects to that
network.
• Always On: Leaves the Wi-Fi feature
on, and your smartphone searches for
available networks whenever the
screen is awake. If a network to which
you previously connected is available,
your smartphone automatically
connects to that network. When this
mode is enabled, you can prevent