User's Manual Part 1

iv
Charge your PCS Treo 300 battery
You can connect the USB cable that comes with your PCS Treo 300, or you can purchase a
serial cable at
www.handspring.com.
A Plug the Travel Charger into a wall outlet.
B Connect the Travel Charger to the short end of the HotSync
®
cable. Be sure to match the sides
of the connectors labeled “UP.”
C Connect the long end of the HotSync cable to your PCS Treo 300 with the button facing up.
We recommend 2 hours for the first full charge. To confirm your PCS Treo 300 is charging,
check the LED on top of the unit: red = charging; green = fully charged.
1
A
A
B
B
C
C
USB HotSync
cable
Serial HotSync
cable
Sprint Start.book Page iv Monday, June 17, 2002 8:57 AM