User Guide

LifeDrive from palmOne 659
CHAPTER 31 Common Questions
Sharing
I can’t beam information to another device or other device.
Depending on the receiving device model, not all information may be sent correctly.
• If you are beaming to another Palm Powered device, confirm that your device and the other
device are 4 to 39 inches (approximately ten centimeters to one meter) apart and that the path
between the two devices is clear of obstacles. Beaming distances to other devices with an IR
port may be different.
• Move your device closer to the receiving device.
• Make sure the receiving device has beam receive enabled
.
• Perform a soft reset
on both your device and the receiving device.
• Avoid beaming in bright sunlight or fluorescent light. These produce infrared noise that can
make beaming go slower or, in some cases, prevent it from working at all.
When someone beams information to my device, it doesn‘t receive
the info.
• If you are receiving info from another Palm Powered device, confirm that your device and the
other device are 4 to 39 inches (approximately ten centimeters to one meter) apart and that the
path between the two devices is clear of obstacles. Beaming distances to other devices with an
IR port may be different.
• Move your device closer to the sending device.
• Make sure your device has beam receive enabled
.
• Perform a soft reset
on both your device and the beaming device.
NOTE