User Guide

LifeDrive from palmOne 636
CHAPTER 31 Common Questions
• Keep your device connected to the AC charger plugged into a power outlet when using Drive
Mode or Camera Companion for an extended period of time.
• Respond to or cancel alerts
promptly.
• Turn off Bluetooth® wireless technology
and Wi-Fi® functionality when not in use.
•If using Auto Sync
to automatically retrieve email messages, set the time interval to one hour or
less often.
• Minimize use of the expansion slot
.
When I connect my device to the AC charger, it does not charge.
• Confirm that your device is firmly connected to the AC charger.
• Confirm that your AC charger is plugged into an AC outlet that has power.
A lightning bolt over the battery icon indicates that your device is charging. If your battery is
completely drained, you’ll need to charge it for a few minutes before you can turn it on and see the
battery icon.
My device is not responding.
On rare occasions your device may not respond when you press a button or tap the screen. If this
happens, first check that Keylock
is not turned on.
If Keylock is off and your device is still not responding, you need to reset your device. A soft reset
tells your device to stop and start over again. This does not affect any of the information or
applications on your device.
If you had a network connection that was cut off, your device may not respond for up to
30 seconds. Wait 30 seconds before performing a soft reset.
Tip
After a soft reset, the
Preferences screen
appears with the Date &
Time option highlighted
so you can reset the date
and time if necessary.
NOTE