User Guide

LifeDrive from palmOne 4
CHAPTER 1 Setting Up Your Device and Your Computer
Step 1: Charging your device
0
1 Connect your device:
a. Plug the USB sync cable into
your device and into a USB
port on the back of your
computer.
b. Plug the AC charger into the
Multi-connector on the sync
cable and into an outlet.
2 Charge your device for three hours. Be sure your device is fully charged before
going on to Step 2.
Done
Before You Begin
[ ! ]
If you’re upgrading from
another Palm Powered™
device, synchronize your
old device with your old
desktop software.
Tip
After the initial charge,
charge your device at
least half an hour every
day.