User Guide

LifeDrive from palmOne 95
CHAPTER 5 Moving and Managing Info Between Your Device and Your Computer
0
1 Prepare your device and your computer:
a. Connect the USB sync cable to the USB port on the back of the computer,
and then insert the other end into your device.
b. Connect the AC charger cable to the USB sync cable, and then plug it into a
power outlet.
You can use Drive Mode without plugging your device into a power
outlet, but we recommend that you keep it plugged in to avoid losing
information.
2
Turn on Drive Mode:
a. Go to Applications
and select
Drive Mode .
b. Select Turn Drive Mode On.
Continued
Tip
If you format your
device’s hard drive or an
expansion card while in
Drive Mode, be sure to
select the file system type
FAT32; do not select FAT
or any other file system
type. If you select any
other file system type,
your device cannot
recognize the information
on the drive or on the
card. Note that if you
reformat the hard drive,
all information on the
drive is deleted—and if
there are sync items and
you have selected the
Delete on PC option,
those items are deleted
on your computer as well
the next time you
synchronize.
NOTE