User Guide

24 Section 1A: Setting Up Your Palm Centro™ Smart Device
The onscreen battery icon displays the power status:
䢇 Full battery : Battery is fully charged.
䢇 Partial battery : Battery has some power but is not fully charged.
䢇 Almost-empty battery with red at the bottom : Battery needs to be charged immediately.
䢇 Red lightning bolt : Battery is connected to a wall outlet and is being charged.
䢇 Green lightning bolt : Battery is connected to a wall outlet and is fully charged.
Using a Sprint Charger Adapter
If the connector on your Sprint-approved 1 Amp AC charger or vehicle charger doesn’t fit into
the connector on the bottom of your device, use the included Sprint charger adapter.
1. Plug the AC charger into a power source.
2. Connect the Sprint charger adapter to the charger jack on bottom of the device.
3. Connect the charger cable to the Sprint charger adapter.
Note
Your device’s indicator light blinks red when the battery needs to be
charged.
Tip
To see exactly how much power is left in your battery, tap the onscreen
battery icon.
WARNING
Use only with 1 Amp AC chargers distributed by Sprint for your device.
Using any unapproved AC charger may destroy the AC charger and cause a
fire.