User's Manual

T|X Handheld 67
CHAPTER 6 Your Personal Information Organizer
Beaming a contact
0
1 Press Contacts .
2 Beam the contact:
a. Locate the contact
you want to beam.
b. Open the menus
.
c. Select Record, and then select Beam Contact.
d. When the Beam Status dialog box appears, point your handheld’s IR port
directly at the IR port of the other handheld.
For best results, the handhelds should be between 4 and 36 inches
apart, and there should be a clear path between them. Depending on the
receiving handheld model, not all information may be sent correctly.
3 Wait for the Beam Status dialog box to indicate that beaming is complete.
Done
Tip
You can create a contact
with your own
information and select it
as your business card by
opening the Record
menu and selecting
Business Card. Beam
your business card to
other handhelds by
holding down the
Contacts button until
the Beam dialog
box appears.
Did You Know?
A Beam command
appears on the leftmost
menu of most
applications. Beam
information such as
photos or appointments.
Tip
You can also send
information to other
devices using your
handheld’s built-in
Bluetooth
®
wireless
technology.
IR port
NOTE