User's Manual

LifeDrive from palmOne 349
CHAPTER 18 Sending and Receiving Email Messages
Cont’d
Port Number By default, the port number setting is 110 for POP and 143 for
IMAP servers. You may need to change the port number if you choose to
retrieve incoming mail over a secure connection (see the next item).
Secure connection To retrieve incoming mail over a secure (Secure Sockets
Layer, or SSL) connection, check the box. The port number for incoming mail
then changes to 995.
APOP (POP accounts only) To encrypt your username and password when
they travel over the network, check this box. Some services work properly only
if APOP is used, while others do not work properly if APOP is used.
4 Click the Outgoing Mail tab and
verify or edit any of the following
settings:
Outgoing Server Enter the
address of your outgoing mail
server.
Port Number The default is 25,
the port number most SMTP
servers use.
Secure connection To se n d
outgoing mail over a secure (Secure
Sockets Layer, or SSL) connection,
check the box. This server requires
a secure connection (SSL).
Continued
Tip
Do not check the Secure
connection box if
VersaMail displays Direct
POP or Direct IMAP
connection to server in
the Desktop Connection
field. If you check the box,
you cannot receive
incoming messages
correctly. To use SSL with
your account, set up the
account on your device
and check the Use Secure
Connection box on the
appropriate screen.
SECOND DRAFT palmOne, Inc. Confidential