User guide

Section 3F: Using Bluetooth® Wireless Technology and Dial-Up Networking 175
Bluetooth/DUN
1. Go to Applications and select Bluetooth .
2. Select On.
3. Enter a device name for your Treo device. (This is
the name that appears on the other Bluetooth
device’s screen when it connects to your Treo
device. You need to enter a device name only
once.)
4. Select the Visibility pick list and select one of the
following:
䡲 Visible enables Bluetooth devices that are not on your Trusted Device list
to request a connection with your device. Your device remains
accessible to other devices until you turn this option off.
䡲 Tem po rar y enables Bluetooth devices that are not on your Trusted Device
list to request a connection with your device during the next two
minutes. Your device reverts to the Hidden setting and becomes
inaccessible to other devices after two minutes.
䡲 Hidden allows only devices with which you have previously formed a
partnership to request a connection with your Treo device. New devices
cannot request a connection.
Important:
For your Treo device to be visible to other Bluetooth devices, the
Bluetooth setting must be set to On, and visibility must be set to Visible
or Te mp ora ry. Your Treo device screen does not need to be turned on. If
you are requesting a connection with another device, or if you are
accepting a request from a trusted device, your Treo device can be set to
any of the Visibility options.