User's Manual

Conducting network HotSync operations
297
5. Click Conduit Settings.
6. For each application, click the direction in which you want to write data, or click
Do Nothing to skip data transfer for an application.
Changing the HotSync setting from the default affects only the next HotSync
operation. Thereafter, the HotSync Actions revert to their default settings. To
use a new setting on an ongoing basis, click Make Default. Thereafter, whatever
you selected as the default setting is used for HotSync operations.
7. Click OK.
8. Close the Conduit Settings window.
Conducting network HotSync operations
When you use the network HotSync technology, you can take advantage of the
LAN and WAN connectivity available in many office environments. Network
HotSync technology enables you to perform a network HotSync operation using
any one of the following methods:
■ 802.11b radio
■ Using a cradle/cable that is connected to any computer on your LAN or WAN
(provided that the computer connected to the cradle/cable also has the network
HotSync technology installed, your computer is on, and the HotSync Manager
is running).
DRAFT Palm, Inc. Confidential