User's Manual

Going beyond the basics
239
To turn a filter on or off:
1. Press Function + Menu .
2. Select Options, and then select Filters.
The Filters dialog box appears with the filters you created.
3. Tap the pick list in the upper-left corner, and select Connected Accounts or
Synchronize Only Accounts.
– Connected applies a filter to a modem transaction.
– Sync Only applies a filter to a HotSync operation.
4. Tap the filter check boxes to select the filters you want to use for subsequent
e-mail transactions.
IMPORTANT If you deselect a filter listed under Connected, be sure that the filter
is deselected also under Synchronize.
5. Press Function + Enter , or tap OK.
Filters with a check mark
are turned on
FLOW
FLOW
DRAFT Palm, Inc. Confidential