Assembly Instructions

Cut sections of Paliade to line the inside of the niche. Measure and cut
Paliade tiles so that they terminate at the niche opening. Apply a generous
amount of the approved adhesive to the rear of the Paliade tiles to ensure
proper adhesion over the ledge of the niche (where it transitions from the
water board to the niche). Adhere tile pieces to the inside of the niche.
Line framed structure with waterproof board and seal joints with sealant,
ensuring a waterproof seal.
Seal joints with silicone sealant, ensuring a waterproof seal.
Cut and miter trims to treat the 90-degree connection point of the
Paliade tiles. When dried, apply bead of sealant at the inside corners
of the niche.
000-00 (4-18-2021)