Assembly Instructions
For a custom-built niche, nished with Palisade
Decide on a location for the niche. The back third of the side or rear wall of
the shower is best, as these locations receive the least amount of water. Tip:
In colder climates, avoid locating on outside wall to retain insulation behind it.
Insert preformed membrane with Paliade tile applied into niche opening.
Cut edge trims to t niche edges. Afx with adhesive. After adhesive has set
up, apply sealant around trim edges.
Apply
Paliade tiles over membrane lip. Continue applying tiles to complete
project. Apply sealant to edges, corners and anywhere else water could
penetrate.
Construct a framed box between the wall studs.