Operation Manual

27
3. Take the thinner which you used to mix up the coating material and use it to thoroughly
clean the paint container, the rubber seal in the lid of the paint container, the hose, the
spray nozzle and all components of the spray gun on which there are residues of the coating
material. Also clean the viscosity measuring cup.
4. Only ever clean the basic unit with a soft brush or a slightly damp clean cloth. No liquids
must get inside the basic unit.
5. Once all parts have dried completely, store the device away in a dry place which is out of the
sun and is also out of the reach of children and animals.
Reordering a Paint Container
You can order a new paint container at: www.service-shopping.de
Technical Data
Article number: Z 04311
Model number: Q1P-WT01-100
Voltage supply: 230–240 V~ 50 Hz
Output: 600 W
Capacity of the paint container: 800 ml
Sound power level (L
WA)*: 93.8 dB (A)
Sound pressure level (L
PA)*: 80.8 dB (A)
Vibration emission: 1.6 m / s²
Protection class: II
* PLEASE NOTE: The specifi ed values are emission values and they do not therefore also
represent safe workplace values. Although there is a correlation between emission and immission
levels, it cannot reliably be inferred from this whether additional precautionary measures are
necessary or not. Factors which infl uence the current immission level existing at a workplace
include the nature of the workspace, other noise sources, e. g. the number of machines and
other working processes taking place nearby. The permitted workplace values can also vary
from country to country. However, this information should help you to be able to make a better
assessment of hazard and risk.