Operation Manual

25
B Vertical fl at jet for horizontal working direction (for larger areas)
C Round jet for corners, edges and spots which are diffi cult to access.
4. Place the spray gun in the removable bracket on the basic unit. Put on the carrying strap with
the basic unit and the spray-paint gun.
5. Direct the spray gun on a test area or a piece of cardboard before you start working on the
actual area you want to work on with the device.
6. Move the On / Off switch to the position 1. As soon as you have activated the device with
the On / Off switch, a continuous fl ow of air will emerge from the nozzle.
7. Press the spray trigger until paint emerges.
8. You can use the adjusting wheel on the spray gun to control
the amount of paint released and thus set the strength of the
jet of paint. Turn the adjusting wheel clockwise to reduce
the strength of the jet and anticlockwise to make it stronger.
With smaller areas, we recommend applying a smaller amount
of paint so that the layer of coating material applied does not
become too thick. Adjust the amount of paint so that the paint
is distributed evenly and there is not a thin jet of paint which
will result in spotting.