MSDS

Page 3 of 5

MSEP, LLC. – PAINTERASE ODOR ELIMINATING FOGGER dix1701617016

8) EXPOSURE CONTROLS/PERSONAL PROTECTION

 EXPOSURE LIMITS

Chemical name:

Identifier:

PEL:

ACGIH:

NIOSH:

Isopropyl alcohol

CAS: 67-63-0

400 ppm

Difluoroethane

CAS: 75-37-6

N/A

 VENTILIATION REQUIREMENTS: Good mechanical ventilation may be adequate for maintaining

airborne concentrations below established exposure limits for large uncontrolled releases.

 IF EXPOSURE LIMITS ARE EXCEDED AND INHALED: Use a NOISH approved respirator.

Practice good industrial hygiene. Wash hands before breaks and at the end of the

workday. Keep material away from foodstuffs, beverages, and feed. Wash and

launder all contaminated clothing.

9) PHYSICAL AND CHEMICAL PROPERTIES

 APPEARANCE: Clear or yellowish liquid

 ODOR: Cotton

 ODOR THRESHOLD: Not determined or not applicable

 pH: Not determined or not applicable

 VAPOR PRESSURE: 60-70psi at 70°F

 DENSITY: Not determined or not applicable

 SOLUBILITY: Soluble in water

 MELTING/FREEZING POINT: Not determined or not applicable

 BOILING POINT: Not determined or not applicable

 FLAMMABLE EXPLOSIVE LIMITS (% volume in air): Not determined or not applicable

 FLASH POINT (TCC closed cup): Not determined or not applicable

 FLAME EXTENSION: Does not extend flame

 FLAMMABILITY: Level 1 Aerosol, non-flammable

 AUTO-IGNITION TEMPERATURE: Does not auto-ignite

 DECOMPOSITION TEMPERATURE: Not determined or not applicable

 EVAPORATION RATE: Not determined or not applicable

 VISCOSITY: Not determined or not applicable

 VOLATILES BY VOLUME: <20%

10) STABILITY AND REACTIVITY

 CHEMICAL STABILITY: Stable under normal conditions

 HAZARDOUS POLYMERIZATION: Cannot occur

 INCOMPATIBLE MATERIALS: Strong oxidizing agents

 HAZARDOUS DECOMPOSITION PRODUCTS: Carbon dioxide and carbon monoxide and other

combustion products are possible

 CONDITIONS TO AVOID: Heat, sparks, open flames, ignition sources, and sunlight.