３＋ RC! INTERACTIVE RACE CAR Instruc�on Manual 62119
List of parts Please clean the product with a clean soft cloth.
How to Play 1. Set-up 2. Add a set When prompted, scan This QR code to unlock the Botzees RC! Interac�ve Race Car features. Scan Search For “Botzees Junior” and download the Botzees Junior app. Compa�bility: Android 7+ iOS 11+ Please go to www.pai.technology to check the complete device compa�bility list. 3. Unlock more combina�ons Click the main image to try out more build combina�ons.
Let’s warm-up. Go faster! Sensor mode Remote control mode Slow down at the curve ahead.
Time for the final dash! It’s the curve. Turn le�. Roll your wrist to change the direc�on of the car.
1 The racer BOBO is in the third one of the building blocks packages.
Assemble it as the picture suggests.
1 2
Assemble it as the picture suggests.
1 2 3
Assemble it as the picture suggests.
Where to put the stickers
Where to put the stickers
Sensor Mode Forward Left Policeman voice button Right Speed change button Racing sound button Backward More comands Left-forward Left-backward Right-forward Right-backward DIY your racing circuit
Please read the instructions before using this product. Note: The following steps should be done either by an adult or under adult supervision. Ba�eries installing and changing (this should be done by an adult). Prepara�on Before assembly, please prepare four 1.5V AA ba�eries, two 1.5V AAA ba�eries and a Phillips head screwdriver (not included). Switch Installing the main control block ba�ery 1.Use a Phillips head screwdriver. Unscrew the bo�om screws counter-clockwise and remove the ba�ery cover. 2.
Remote control sync Confirm the main control block is on, then press any bu�on on the remote control. The remote control will sync with the main control block. A�er the sync is completed, the light on the remote control will automa�cally go out. If the indicator light con�nues to flash a�er 30 seconds, it means sync was not successful. Please re-start the sync process again. (See the “Re-start sync” page.
Precautions 1. The ba�ery should be replaced by an adult. Please dispose of the ba�ery properly. Keep the ba�eries out of the reach of children to avoid choking hazard. 2. Remove the ba�ery when it is exhausted or not in use for a long �me. 3. Only the alkaline ba�eries can be used in the main controller of this product. Do not mix different types of ba�eries or old and new ba�eries. 4.
www.pai.
