Palapala a ka mea nona
Need Help? Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer
Service contact information is listed at the back of this manual.
3
BEFORE YOU BEGIN
Remove contents from box. Remove the separators that protect the components from damage during shipping.
Inspect the contents of the box for scratches in the paint, dents or kinked cables that may have occurred during
shipping. Because the Crazy Cart XL was 99 percent assembled and packed at the factory, there should not be any
problems, even if the box has a few scars or dents.
MAKE SURE POWER SWITCH IS TURNED “OFF” BEFORE CONDUCTING ANY ASSEMBLY OR
MAINTENANCE PROCEDURES.
Estimated Assembly and Set-Up Time
Razor recommends assembly by an adult.
Allow up to 5 minutes for assembly, not including initial charge time.
Allow up to 12 hours for charge (see page 5 for charging information).
WARNING: DO NOT USE
NON-RAZOR PARTS WITH YOUR
CRAZY CART XL. The Crazy Cart
XL has been built to certain Razor
design specifications. The original
equipment supplied at the time of
sale was selected on the basis of
its compatibility with the frame and
all other parts. Certain aftermarket
components may not be compatible.
Use of non-Razor parts will void
the warranty.
WARNING: Turn
power switch off before
conducting any assembly or
maintenance procedures.
Box Contents:
• Crazy Cart XL
• Charger
• Owner’s Manual
• Flag
• Drift Bar Lock Knob
Product ID Locations:
(See locations to the left)
1. Front of Frame
2. Right Side Next to Drift Bar
3. Charger
4. Box (Not Shown)
Speed Control /
Accelerator Pedal
Steering Wheel
Charger Port
Caster Wheels
Stabilizing Posts
On/Off Switch
3.
Drift Bar
2.
1.
Charger
(Note: Charger design
may vary from one shown)