Palapala a ka mea nona

OFF
10
7 Re-attach the chain guard with
the screws removed in step 3.
1 Carefully turn product over.
Using two (2) 5 mm Allen wrenches;
loosen coupling bolt and remove
wheel. Install the replacement
wheel into caster and tighten
coupling bolt to secure wheel
in place.
8 Use two (2) 16 mm wrenches to
re-secure front tire in place.
Note: Make sure the spacer in the
center of the wheel is aligned with
the holes in the bearing before
inserting the coupling bolt.
9 Re-attach the motor cover with
the hardware removed in step 1.
4 mm
Allen Bolt
Note: Practice riding only in wide
open areas clear from curbs,
parking blocks and other obstacles.
Impacting the wheels against
any hard surface can damage the
wheels. Wheels are not covered
under your limited warranty.
Front Tire/Chain Replacement - continued
REPAIR AND MAINTENANCE
Caster Wheel Replacement
Required Tools: Two (2) 5 mm Allen Wrenches (not included)