Palapala a ka mea nona

OFF
Need Help? Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer
Service contact information is listed at the back of this manual.
9
Note: Front tire hardware sequence
1 Using a Phillips screwdriver,
loosen the seven (7) Phillips screws
and using a 4 mm Allen wrench,
loosen the two (2) 4 mm Allen bolts;
remove motor cover.
2 Using two (2) 16 mm wrenches,
remove the locknuts on the front
axle bolt and slide axle bolt out from
the front tire.
3 Using a Phillips screwdriver,
loosen the four (4) Phillips screws
on the front fork and remove the
chain guard.
4 Using a Phillips screwdriver,
loosen the four (4) Phillips screws
on the chain plate and remove
chain plate.
5 Push down on the chain tensioner
to create slack in the chain and then
carefully remove the chain from
around the wheel sprocket. Remove
tire from the front fork.
If replacing the chain, also
remove the chain from around
the motor shaft.
6 Install replace tire/chain.
Reinsert axle bolt (see hardware
sequence). Push the chain tensioner
down to create slack in chain. verify
chain is properly installed on each
sprocket and tensioner is correctly
positioned and applying tension on
the chain. Re-attach the chain plate
with the hardware removed in
step 4.
4 mm
Allen Bolt
REPAIR AND MAINTENANCE
Turn power switch “OFF” before beginning repair or maintenance:
Read the instructions
Remove charger plug
Turn the power switch off
Secure the product under repair
Exercise caution around
exposed parts
Contact Razor customer
service if unsure about any
repair or maintenance
Front Tire/Chain Replacement
Required Tools: Phillips Screwdriver, 4 mm Allen Wrench, and Two (2) 16 mm Wrenches (not included)
Right Side (Throttle)
7-1 Locknut
7-2 Spring Washer
7-3 Flat Washer
Fork
7-4 Spacer
Left Side
7-1 Locknut
7-2 Spring Washer
7-3 Flat Washer
Fork
7-4 Spacer
7-1
7-3
7-4
7-4
7-2
7-3
7-1
7-2