Data Sheet

Run-Time & Capacity Display
PAGlink Gold Mount batteries incorporate a convenient
numeric display that with two button presses on-load
shows remaining camera run-time in hours and
minutes.
When batteries are linked, the run-time figure
is for the entire stack.
A
single button press shows individual battery capacity
as a percentage, in 1% increments.
The display
maintains accuracy by tracking cell-performance and
adjusting calibration values to compensate for cell-
aging.
PAGlink batteries display their remaining capacity in the
camera viewfinder/LCD by communicating automatically
with the data system that also allows Anton/Bauer
batteries to display capacity.
Intelligent Gold Mount Batteries
PAGlink Gold Mount batteries are designed as a high-
current replacement for all Anton/Bauer Li-Ion batteries.
PAGlink is the first intelligent linking battery system
designed for today’s computerised cameras. It offers
more power, more benefits and more technological
advancements than any other battery system.
PAGlink makes other battery systems seem crude by
comparison.
The smaller and lighter PAGlink Li-Ion batteries are
compatible with A/B Gold Mount camera plates and
with A/B Li-Ion chargers; there is no need to replace
expensive equipment in order to benefit from the many
advantages of PAG’s revolutionary, intelligent linking
batteries.
Two or more PAGlink batteries of any capacity, in any
state of charge, can be linked, combining their capaci-
ties, increasing run-time, and enabling a higher current
to be drawn. Up to 12A can be supplied, via high-current
contacts, for power-hungry camera set-ups that include
multiple accessories. Individually, PAGlink Gold mount
batteries have maximum continuous output of 10A.
PAGlink also allows batteries to be hot-swapped for
continuous power, which means no more time-wasting
camera reboots while shooting. Intelligent PAGlink
batteries form a network when linked, allowing them to
communicate with each other and manage output safely
and efficiently. The batteries do not discharge into one
another.
Output
Communication
Linking two PL94T batteries produces a capacity of
188Wh, three give you 282Wh.