Operation Manual

There are error codes that may be displayed. These will be displayed in the
following way:
16
Error Code
Charging
LED
Fault
LED
Cause
Remedy
Fully Charged
LED
Polarity Reverse
/ Output Short
Short circuit or
reverse
connection of the
clips
Check clips are not
touching each other
OR Check the clips are
correctly connected to
the battery.
Non Battery
Link
Non battery link
Please choose the
right battery type for
connection.
Over Voltage
The 12V battery
voltage is above
17.5V.
The 24V battery
voltage is above
35V.
Over
Temperature
Internal
temperature
is above
O O
65 C +/-5 C
Turn off charger and
allow to cool.
Faulty
Battery
(Bulk
Led)
Bulk charging
has timed out
and stopped after
24 hours.
Battery is faulty and
may need to be
replaced.
Disconnect the
charger and check
the battery voltage.
This charger is
suitable for 12V or
24V Batteries only.
18. FAULT CODES